Airtac SGC Standard Cylinder SGC160X35SN
The AirTAC Airtac SGC Standard Cylinder SGC160X35SN is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø160mm bore and 35mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ160 mm
- Stroke35 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC160X35SN
Delivering 10053 N of push force at 0.5 MPa, this double-acting ISO 15552 tie-rod cylinder handles heavy automation tasks. Four steel tie rods clamp the aluminum barrel to the covers for high rigidity, while the two-way piston seal maintains an internal oil reservoir for long service life. Plan for roughly 6032 N of real work, which means it lifts about 512 kg vertically with a 2:1 safety margin.
This specific SKU includes a built-in piston magnet for CMSG, DMSG, or EMSG switches, and uses an NBR seal suitable for standard operating temperatures. It features a 160 mm bore, a 35 mm stroke, a G3/4 air port, and an M36x2.0 rod thread. The adjustable air cushions at both ends decelerate the piston smoothly near stroke end.
Airtac SGC Standard Cylinder SGC160X35SN Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC160X35SN |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø160 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC160X35SN
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 160 | Bore size in mm (125 / 160 / 200 / 250). |
| ×35 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC160X35SN Is Used
Press Fit Assembly
Drives bearings into heavy housings, utilizing the 10053 N push force at 0.5 MPa for reliable seating.
Pallet Stopper
Acts as a robust end-stop for loaded pallets on conveyor lines, absorbing impact with its 50 mm adjustable cushion.
Gate Diverter
Shifts heavy diverter gates on packaging sortation systems using the CMSG sensor to confirm position.
Is the Airtac SGC Standard Cylinder SGC160X35SN the Right Cylinder?
If you need less force, the smaller SGC125 bore provides 6136 N push at 0.5 MPa; stepping up to the SGC200 yields 15708 N. For this 35 mm stroke, side-load risks are minimal, but always guide the rod end to prevent premature seal wear. This model uses an NBR seal, and the -S magnet enables position sensing.
Remember that a standard cylinder drifts when air is lost or the valve is centered, as the air cushion only decelerates the piston and does not act as a brake. To suspend a load safely, install an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC160X35SN FAQ
At 0.5 MPa it provides 10053 N push and 9425 N pull. At 0.7 MPa it provides 14074 N push and 13194 N pull. The theoretical maximum force is 2050 kgf at 1.0 MPa. The air port size is G3/4.
Yes, it is dimensionally interchangeable per the ISO 15552 mounting interface, so it fits standard large-bore fixtures and brackets. It does not hold a load on air loss; use an external rod lock or pilot-operated check valve for suspended loads.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC160X35SN
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.