Airtac SGC Standard Cylinder SGC160X550SH
The AirTAC Airtac SGC Standard Cylinder SGC160X550SH is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø160mm bore and 550mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ160 mm
- Stroke550 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC160X550SH
Delivering 10053 N of push force at 0.5 MPa, this double-acting large-bore cylinder is built for heavy-duty automation. The Ø160 mm bore utilizes a genuine ISO 15552 mounting interface, ensuring it drops directly into existing large-bore fixtures without custom bracketry. Four steel tie rods clamp the aluminum barrel to the covers, providing the high rigidity needed to handle large thrust loads, while a two-way piston seal maintains an internal oil reservoir for long service life.
Because this SKU includes the -S magnet, it supports CMSG, DMSG, and EMSG position switches for end-of-stroke detection. The -H designation specifies Viton (FKM) seals, extending the operating temperature range from -20 to +70 °C up to 0-150 °C for high-heat environments. Plan for about 6032 N of real work at 0.5 MPa, which equates to lifting roughly 512 kg vertically with a 2:1 safety margin. Air enters via the G3/4 port, and adjustable air cushions at both ends absorb kinetic energy near stroke end.
Airtac SGC Standard Cylinder SGC160X550SH Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC160X550SH |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø160 mm |
| Stroke | 550 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC160X550SH
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 160 | Bore size in mm (125 / 160 / 200 / 250). |
| ×550 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC160X550SH Is Used
Injection Mold Clamping
Applies up to 14074 N of clamping thrust at 0.7 MPa to secure heavy injection mold halves, utilizing the 550 mm stroke to clear large part ejection zones.
Pallet Dispenser Pusher
Cycles empty pallets into high-speed packaging lines, moving roughly 500 kg loads horizontally with a safe 2:1 working margin at 0.5 MPa.
Automotive Press Feed
Feeds heavy steel blanks into a hydraulic press, relying on the four steel tie rods for structural rigidity and Viton seals to survive ambient shop heat.
Is the Airtac SGC Standard Cylinder SGC160X550SH the Right Cylinder?
This 160 mm bore sits between the smaller Ø125 (which outputs 6136 N push at 0.5 MPa) and the larger Ø200 (which outputs 15708 N push at 0.5 MPa). Choose this model when your application requires substantial force but the 200 mm bore exceeds your spatial footprint. The 550 mm stroke provides extended travel, but at this length you must account for rod-bending and side loads—always use an external guide or load support to prevent premature seal wear and piston scoring.
Remember that a standard double-acting cylinder drifts when air is lost or the valve is centered; the adjustable cushion only decelerates the piston near the end caps and does not act as a brake. If your machine requires strict position holding, integrate an external rod lock or a pilot-operated check valve. The built-in magnet (-S) pairs with CMSG, DMSG, or EMSG sensors, and the Viton seal (-H) handles sustained high-temperature exposure.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC160X550SH FAQ
This Ø160 mm bore cylinder features a G3/4 air port and a 40 mm piston rod. It generates 10053 N push and 9425 N pull at 0.5 MPa, 14074 N push and 13194 N pull at 0.7 MPa, with a theoretical maximum force of 2050 kgf at 1.0 MPa.
No, the double-acting SGC design does not hold position on air loss, and the adjustable air cushion only decelerates the piston near stroke end—it is not a locking brake. For suspended vertical loads, you must install an external rod lock or a pilot-operated check valve to prevent drift.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC160X550SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.