Airtac SGC Standard Cylinder SGC160X55S
The AirTAC Airtac SGC Standard Cylinder SGC160X55S is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø160mm bore and 55mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ160 mm
- Stroke55 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC160X55S
Delivering 10053 N of push force at 0.5 MPa, this double-acting tie-rod cylinder brings massive thrust to demanding setups. The 160 mm bore uses a G3/4 air port and an M36x2.0 piston rod to handle heavy loads. Four steel tie rods clamp the aluminum barrel to the covers, ensuring structural rigidity under high pressure. The two-way piston seal also maintains an internal oil reservoir for continuous lubrication and extended service life.
Equipped with a piston magnet (-S), the unit supports CMSG, DMSG, and EMSG switches for precise position detection. For practical sizing, plan for roughly 6032 N of real work at 0.5 MPa, which equates to lifting about 512 kg vertically with a 2:1 safety margin. The standard TPU seal handles temperatures from -20 to +70 C, while a Viton H option extends this range up to 150 C for heated environments.
Airtac SGC Standard Cylinder SGC160X55S Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC160X55S |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø160 mm |
| Stroke | 55 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC160X55S
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 160 | Bore size in mm (125 / 160 / 200 / 250). |
| ×55 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC160X55S Is Used
Stamping Press Feed
Drives heavy gauge material into a mechanical press, utilizing the 10053 N push force to overcome insertion resistance in automated metal forming lines.
Pallet Stopper Gate
Acts as a high-capacity routing gate on heavy-duty roller conveyors, using the built-in magnet and DMSG sensors to confirm gate position for warehouse logistics.
Injection Mold Clamp
Secures large mold halves during low-pressure closing sequences, relying on the rigid tie-rod construction to prevent deflection under high clamping loads.
Is the Airtac SGC Standard Cylinder SGC160X55S the Right Cylinder?
When sizing this 160 mm bore unit, compare its 10053 N push force at 0.5 MPa against the smaller 125 mm bore (6136 N) or the larger 200 mm bore (15708 N) to match your exact requirement. The 55 mm stroke provides short, rapid actuation, and because it is under 500 mm, side-load stress on the rod is minimal. The ISO 15552 mounting interface allows seamless integration with standard FA/FB flanges or TC trunnions.
Remember that a standard double-acting cylinder will drift and lose its position if air pressure drops or the valve is centered. The adjustable 50 mm air cushions at both ends only decelerate the piston near the stroke limits; they do not act as a locking brake. To safely suspend a vertical load, install an external pilot-operated check valve or a dedicated rod lock.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC160X55S FAQ
This 160 mm bore cylinder features a G3/4 air port and an M36x2.0 rod thread. It generates 10053 N push and 9425 N pull at 0.5 MPa, 14074 N push and 13194 N pull at 0.7 MPa, with a theoretical maximum force of 2050 kgf at 1.0 MPa.
Yes, the -S suffix indicates a built-in piston magnet compatible with CMSG, DMSG, and EMSG switches. Additionally, the body is dimensionally interchangeable per the ISO 15552 mounting interface, allowing you to use standard LB foot, CA clevis, or TC trunnion accessories.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC160X55S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.