Airtac SGC Standard Cylinder SGC160X600FB
The AirTAC Airtac SGC Standard Cylinder SGC160X600FB is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø160mm bore and 600mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ160 mm
- Stroke600 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC160X600FB
Delivering 10053 N of push force at 0.5 MPa, this double-acting ISO 15552 tie-rod cylinder handles large-bore automation with a 600 mm stroke. Four steel tie rods clamp the aluminum barrel to the covers, providing the high rigidity needed under heavy thrust, while a two-way piston seal maintains an internal oil reservoir for long service life. The G3/4 port and M36x2.0 rod thread match the 160 mm bore standard.
Because this SKU lacks the -S magnet, it cannot accept CMSG, DMSG, or EMSG position switches. Plan for about 6032 N of real work at 0.5 MPa, which safely lifts roughly 512 kg vertically with a 2:1 margin. Default TPU seals handle -20 to +70 C, though a Viton H option extends operation to 150 C.
Airtac SGC Standard Cylinder SGC160X600FB Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC160X600FB |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø160 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC160X600FB
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 160 | Bore size in mm (125 / 160 / 200 / 250). |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC160X600FB Is Used
Pallet Transfer Diversion
Pushes heavy timber pallets sideways onto secondary packaging lines using its 600 mm extension and 10053 N thrust at 0.5 MPa.
Automated Warehousing Pusher
Acts as a lateral diverter for large tote boxes, utilizing the FB flange mount to fix rigidly against heavy structural framing.
Press Ejection Mechanism
Cycles formed metal components out of a 150-ton stamping press, relying on the 9425 N pull force to retract the 600 mm rod quickly.
Is the Airtac SGC Standard Cylinder SGC160X600FB the Right Cylinder?
This 160 mm bore sits between the SGC125 (6136 N push at 0.5 MPa) and the SGC200 (15708 N push at 0.5 MPa), making it the right middle ground for loads exceeding 6 kN but well under 15 kN. The included FB flange mounting secures the body per the ISO 15552 interface. Since the stroke is 600 mm, add external guide rails to prevent rod bending and absorb side loads during long extensions.
Note that a standard cylinder drifts when air is lost or the valve is centered; the adjustable 50 mm air cushions only decelerate the piston near the end caps. To suspend a vertical load safely, install an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC160X600FB FAQ
This 160 mm bore cylinder features a G3/4 air port and generates 10053 N push / 9425 N pull at 0.5 MPa, 14074 N push / 13194 N pull at 0.7 MPa, and a theoretical maximum of 2050 kgf at 1.0 MPa.
Because this specific SKU lacks the -S magnet, it cannot accept CMSG, DMSG, or EMSG switches. It does, however, accept standard ISO 15552 mounting-interface accessories, and the FB flange is already specified for rigid body attachment.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC160X600FB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.