Airtac SGC Standard Cylinder SGC160X620CB
The AirTAC Airtac SGC Standard Cylinder SGC160X620CB is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø160mm bore and 620mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ160 mm
- Stroke620 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC160X620CB
Delivering 10053 N of push force at 0.5 MPa, this double-acting ISO 15552 tie-rod cylinder is built for heavy-duty automation. Four steel tie rods clamp the aluminum barrel to the covers, providing the high rigidity needed for large-bore thrust, while a two-way piston seal maintains an internal oil reservoir for long service life. The G3/4 port and M36x2.0 rod thread handle the demanding air volume of the 160 mm bore.
Because this SKU lacks the -S magnet, it cannot host CMSG, DMSG, or EMSG sensors. For real-world sizing, plan for about 6032 N of actual work at 0.5 MPa, which equates to lifting roughly 512 kg vertically with a 2:1 safety margin. The 620 mm stroke operates at 30-500 mm/s, and the standard TPU seals handle -20 to +70 C, with a Viton H option for 0-150 C environments.
Airtac SGC Standard Cylinder SGC160X620CB Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC160X620CB |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø160 mm |
| Stroke | 620 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC160X620CB
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 160 | Bore size in mm (125 / 160 / 200 / 250). |
| ×620 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC160X620CB Is Used
Heavy Press Ejection
Uses the 10053 N push force to eject formed metal parts from a 1000-ton stamping press, absorbing end-of-stroke impact via the 50 mm adjustable air cushion.
Pallet Dispenser Gate
Actuates a heavy diverter gate in an automated palletizing line, relying on the CB clevis to accommodate the swing arc during the 620 mm travel.
Automated Waste Baler
Compresses industrial waste material, where the tie-rod construction maintains structural integrity under the high cyclic loads of the 160 mm bore.
Is the Airtac SGC Standard Cylinder SGC160X620CB the Right Cylinder?
When sizing this 160 mm bore, compare it against the smaller SGC125 (6136 N push @0.5 MPa) or the larger SGC200 (15708 N push @0.5 MPa) to match your exact force requirements. The included CB clevis mount suits pivoting loads, but remember that a plain cylinder drifts when air is lost or the valve is centered; the end-of-stroke air cushion only decelerates the piston and does not act as a brake. For secure vertical holding, add an external rod lock or pilot-operated check valve.
Because the 620 mm stroke is relatively long, large-bore side loads can induce rod bending. Ensure adequate external guide support to prevent premature seal wear and rod damage.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC160X620CB FAQ
This 160 mm bore cylinder features a G3/4 air port. It delivers 10053 N push and 9425 N pull at 0.5 MPa, 14074 N push and 13194 N pull at 0.7 MPa, with a theoretical maximum force of 2050 kgf at 1.0 MPa.
No, this specific SKU does not include the -S magnet option, so it cannot accept CMSG, DMSG, or EMSG switches. You would need the -S variant for magnetic sensing. It is dimensionally interchangeable per the ISO 15552 mounting interface for standard fixtures.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC160X620CB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.