Airtac SGC Standard Cylinder SGC160X650S
The AirTAC Airtac SGC Standard Cylinder SGC160X650S is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø160mm bore and 650mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ160 mm
- Stroke650 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC160X650S
Delivering 10053 N of push force at 0.5 MPa, this 160 mm bore double-acting tie-rod cylinder is built for heavy-duty automation. Four steel tie rods clamp the aluminium barrel to the covers, providing the rigidity needed to handle large-bore thrust without flexing. The G3/4 air port feeds a two-way piston seal that maintains an internal oil reservoir for long service life.
Because this SKU includes the -S magnet, it directly supports CMSG, DMSG, and EMSG position switches. Plan for roughly 6032 N of real work at 0.5 MPa, which means it lifts about 512 kg vertically with a 2:1 safety margin. The 50 mm adjustable air cushions at both ends absorb kinetic energy near stroke end, and you can specify Viton H seals for 0-150 C high-temperature environments.
Airtac SGC Standard Cylinder SGC160X650S Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC160X650S |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø160 mm |
| Stroke | 650 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC160X650S
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 160 | Bore size in mm (125 / 160 / 200 / 250). |
| ×650 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC160X650S Is Used
Automotive Press Loading
Pushes heavy stamping blanks into a hydraulic press, utilizing the 10053 N thrust and 650 mm travel to feed sheet metal safely.
Pallet Dispenser Ejection
Deploys the 650 mm stroke to push empty pallets out of a vertical magazine, using the DMSG sensor to confirm full ejection.
Heavy Package Diversion
Acts as a high-force lane deflector on a packaging line, easily handling loads up to 512 kg with the required 2:1 lift margin.
Is the Airtac SGC Standard Cylinder SGC160X650S the Right Cylinder?
Sizing this 160 mm bore against its neighbours ensures the right fit: the smaller 125 mm yields 6136 N push at 0.5 MPa, while the larger 200 mm provides 15708 N. This model hits a solid middle ground for medium-heavy payloads. The included -S magnet pairs seamlessly with CMSG/DMSG/EMSG sensors for end-of-stroke confirmation. Remember that standard air cushions only decelerate the piston near the end caps; they do not function as a brake. If the machine loses air, the piston will drift, so fit an external rod lock or pilot-operated check valve for suspended loads. Additionally, the 650 mm stroke requires external guide rails to prevent rod bending and premature seal wear under side loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC160X650S FAQ
This 160 mm bore cylinder features a G3/4 air port and an M36x2.0 rod thread. It generates 10053 N push and 9425 N pull at 0.5 MPa, 14074 N push and 13194 N pull at 0.7 MPa, with a theoretical maximum force of 2050 kgf at 1.0 MPa.
Yes, it is dimensionally interchangeable per the ISO 15552 mounting interface, dropping directly into existing large-bore foot, flange, or trunnion fixtures. The rigid tie-rod construction handles high thrust, and the -S magnet allows CMSG, DMSG, and EMSG sensors to track position.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC160X650S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.