Airtac SGC Standard Cylinder SGC160X650SH
The AirTAC Airtac SGC Standard Cylinder SGC160X650SH is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø160mm bore and 650mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ160 mm
- Stroke650 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC160X650SH
Delivering 10053 N of push force at 0.5 MPa, this double-acting ISO 15552 tie-rod cylinder handles heavy automation tasks with ease. Four steel rods clamp the aluminum barrel to the covers for high structural rigidity, while the two-way piston seal maintains an internal oil reservoir for long component life. Plan for about 6032 N of actual work at 0.5 MPa, which safely lifts roughly 512 kg vertically with a 2:1 margin.
Equipped with a Viton H seal, this specific configuration withstands sustained ambient heat up to 150 C instead of the standard 70 C limit. The built-in piston magnet (-S) directly supports CMSG, DMSG, and EMSG position switches. A 50 mm adjustable air cushion at both ends manages deceleration, and the G3/4 port matches the 160 mm bore flow requirements.
Airtac SGC Standard Cylinder SGC160X650SH Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC160X650SH |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø160 mm |
| Stroke | 650 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC160X650SH
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 160 | Bore size in mm (125 / 160 / 200 / 250). |
| ×650 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC160X650SH Is Used
Hot Stamp Press Ejection
Uses the 14074 N push force at 0.7 MPa and Viton H seal to reliably eject formed metal parts from heated hydraulic press beds without seal degradation.
High-Temp Pallet Diverting
Leverages the 650 mm stroke and 9425 N pull force to reposition heavy industrial pallets along oven-adjacent conveyor lines safely.
Automated Forge Clamping
Secures heavy steel billets in place for robotic forging operations, utilizing the rigid four-tie-rod build to absorb high shock loads.
Is the Airtac SGC Standard Cylinder SGC160X650SH the Right Cylinder?
Sizing this 160 mm bore against adjacent options ensures the right fit: drop down to the 125 mm bore for 6136 N push at 0.5 MPa, or step up to the 200 mm bore for 15708 N if your press demands more power. Because this SKU features a 650 mm stroke, external guide rails must support the rod to prevent bending under heavy side loads. Remember that a standard cylinder drifts when air is lost or the valve centers; the air cushion only decelerates the piston near stroke end and never acts as a lock. Install an external rod lock or pilot-operated check valve to hold a suspended load safely.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC160X650SH FAQ
This 160 mm bore cylinder provides 10053 N push and 9425 N pull at 0.5 MPa, or 14074 N push and 13194 N pull at 0.7 MPa, with a theoretical maximum of 2050 kgf at 1.0 MPa. It features a 650 mm stroke, a G3/4 air port, an M36x2.0 rod thread, and operates at speeds between 30-500 mm/s.
Yes, it is dimensionally interchangeable per the ISO 15552 mounting interface, so it drops directly into standard large-bore fixtures and supports LB, FA, FB, CA, CB, and TC mountings. The included -S magnet enables CMSG, DMSG, and EMSG reed or electronic switches for precise end-of-stroke detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC160X650SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.