Airtac SGC Standard Cylinder SGC160X75S
The AirTAC Airtac SGC Standard Cylinder SGC160X75S is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø160mm bore and 75mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ160 mm
- Stroke75 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC160X75S
Delivering 10053 N of push force at 0.5 MPa, this double-acting large-bore cylinder is built around a genuine ISO 15552 mounting interface for seamless fixture integration. Four steel tie rods clamp the aluminum barrel to the covers, providing the high rigidity needed to handle heavy thrust, while a two-way piston seal maintains an internal oil reservoir for long service life. Equipped with a G3/4 port and a 40 mm rod, it operates at speeds of 30-500 mm/s.
Because this SKU includes the -S magnet, it supports CMSG, DMSG, and EMSG position switches for electronic or reed sensing. Plan for roughly 6032 N of actual work at 0.5 MPa, which translates to lifting about 512 kg vertically with a 2:1 safety margin. The standard TPU seals handle temperatures from -20 to +70 C, with Viton H available for 0-150 C environments.
Airtac SGC Standard Cylinder SGC160X75S Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC160X75S |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø160 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC160X75S
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 160 | Bore size in mm (125 / 160 / 200 / 250). |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC160X75S Is Used
Press Fit Assembly
Drives bearings into heavy machinery housings, utilizing the 10053 N push force to seat components precisely without hydraulic fluid.
Pallet Stopper Gate
Acts as a high-force stop gate on conveyor lines, using the -S magnet to trigger CMSG sensors and halt 500 kg pallets reliably.
Stamping Press Feed
Pushes metal blanks into a stamping die, where the 50 mm adjustable air cushions absorb kinetic energy at the end of the 75 mm stroke.
Is the Airtac SGC Standard Cylinder SGC160X75S the Right Cylinder?
When sizing this 160 mm bore, verify if the 10053 N push at 0.5 MPa offers enough margin, or step up to the 200 mm bore (15708 N push) for heavier demands; stepping down to the 125 mm bore yields 6136 N. The 75 mm stroke is compact, but remember that a plain SGC cylinder will drift and cannot hold a load if air pressure drops or the valve is centered—the end cushions only decelerate the piston, so add an external rod lock or pilot-operated check valve if position holding is required. The included -S magnet pairs directly with CMSG/DMSG/EMSG sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC160X75S FAQ
The SGC160X75S features a G3/4 air port and a 40 mm piston rod. It generates 10053 N push and 9425 N pull at 0.5 MPa, 14074 N push and 13194 N pull at 0.7 MPa, with a theoretical maximum force of 2050 kgf at 1.0 MPa.
Yes, the SGC series is dimensionally interchangeable per the ISO 15552 mounting interface, allowing it to drop into existing large-bore fixtures. Its tie-rod construction adds rigidity, and the -S magnet enables CMSG, DMSG, or EMSG switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC160X75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.