Airtac SGC Standard Cylinder SGC160X800
The AirTAC Airtac SGC Standard Cylinder SGC160X800 is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø160mm bore and 800mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ160 mm
- Stroke800 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC160X800
Delivering 10053 N of push force at 0.5 MPa, this double-acting ISO 15552 tie-rod cylinder handles heavy automation tasks across its 800 mm stroke. Four steel tie rods clamp the aluminium barrel to the covers for high structural rigidity, while a two-way piston seal maintains an internal oil reservoir for long service life. Because this SKU lacks the -S magnet, it cannot accept CMSG, DMSG or EMSG position switches.
With a 160 mm bore, the unit uses a G3/4 air port and an M36x2.0 rod thread. For practical sizing, plan for about 6032 N of real work at 0.5 MPa, which equates to lifting roughly 512 kg vertically with a 2:1 safety margin. The default TPU seals operate from -20 to +70 C, though a Viton H option extends this to 0-150 C for high-temperature environments.
Airtac SGC Standard Cylinder SGC160X800 Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC160X800 |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø160 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC160X800
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 160 | Bore size in mm (125 / 160 / 200 / 250). |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC160X800 Is Used
Automotive Press Transfer
Moves heavy stampings along an 800 mm axis, utilising the 10053 N push force to shift panels between die stations.
Pallet Dispenser Ejection
Pushes empty or loaded pallets out of a magazine, where the steel tie-rod build absorbs the high inertial shocks.
Heavy Log Sorting Gate
Actuates a large diverter arm in a timber mill, relying on the ISO 15552 mounting interface for rigid fixture attachment.
Is the Airtac SGC Standard Cylinder SGC160X800 the Right Cylinder?
This 160 mm bore sits between the SGC125 (6136 N push @0.5 MPa) and the SGC200 (15708 N push @0.5 MPa), giving you a clear upgrade path if your air pressure fluctuates. The 800 mm stroke demands careful attention to side loads; always use an external guide or rod-end support to prevent rod bending during long extensions. Furthermore, standard air cushions only decelerate the piston near the end caps and do not function as a brake. If the machine loses air, the piston will drift, so fit an external rod lock or pilot-operated check valve for suspended loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC160X800 FAQ
The 160 mm bore generates a push force of 10053 N and a pull force of 9425 N at 0.5 MPa. At 0.7 MPa, push is 14074 N and pull is 13194 N. The theoretical maximum force is 2050 kgf at 1.0 MPa. It uses a G3/4 air port and features a 50 mm adjustable air cushion at both ends.
No, this specific SKU does not include a magnet. To use CMSG, DMSG or EMSG electronic switches, you must order the -S variant. Additionally, its ISO 15552 mounting interface ensures dimensional interchangeability with standard large-bore fixtures, and the four steel tie rods provide high rigidity for heavy-duty cycles.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC160X800
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.