Airtac SGC Standard Cylinder SGC160X850TC
The AirTAC Airtac SGC Standard Cylinder SGC160X850TC is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø160mm bore and 850mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ160 mm
- Stroke850 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC160X850TC
Delivering 10053 N of push force at 0.5 MPa, this double-acting ISO 15552 tie-rod cylinder is built for heavy-duty automation. Four steel tie rods clamp the aluminium barrel to the covers, providing the high rigidity needed to handle large-bore thrust without flexing. The two-way piston seal incorporates an oil reservoir for continuous lubrication, ensuring a long service life.
With an 850 mm stroke and a G3/4 air port, plan for about 6032 N of real work at 0.5 MPa, which equates to lifting roughly 512 kg vertically with a 2:1 safety margin. Because this specific SKU lacks the -S magnet, it cannot accept CMSG, DMSG, or EMSG position switches. For high-temperature environments up to 150 C, you can specify the Viton H seal option instead of the standard TPU.
Airtac SGC Standard Cylinder SGC160X850TC Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC160X850TC |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø160 mm |
| Stroke | 850 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC160X850TC
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 160 | Bore size in mm (125 / 160 / 200 / 250). |
| ×850 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC160X850TC Is Used
Automated Press Stamping
Provides the consistent 10053 N push force required to actuate heavy stamping dies and form metal components in automated fabrication lines.
Pallet Dispenser Ejection
Utilizes its 850 mm stroke to push empty pallets from vertical magazines onto conveyor chains, handling the weight with robust tie-rod rigidity.
Heavy Gate Diversion
Shifts large weighted diverter gates on aggregate or bulk material conveyors, relying on the TC trunnion mount to handle pivot stresses.
Is the Airtac SGC Standard Cylinder SGC160X850TC the Right Cylinder?
When sizing this 160 mm bore unit, the smaller 125 mm SGC offers 6136 N push at 0.5 MPa, while the larger 200 mm bore provides 15708 N, allowing you to step up or down if your load requirements shift. The integrated TC trunnion mount utilizes the standardized ISO 15552 mounting interface, guaranteeing dimensional interchangeability with existing large-bore fixtures and accessories.
Because the 850 mm stroke is quite long, provide external guide support to prevent rod bending and absorb side loads. Remember that the adjustable air cushion at both ends only decelerates the piston near the stroke limits; it is not a locking mechanism. If the application requires the load to be held during air loss or valve centering, install an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC160X850TC FAQ
This 160 mm bore cylinder features a G3/4 air port and a 40 mm piston rod. It generates 10053 N push and 9425 N pull at 0.5 MPa, 14074 N push and 13194 N pull at 0.7 MPa, with a theoretical maximum force of 2050 kgf at 1.0 MPa.
No, this specific SKU does not include a magnet, so it cannot support CMSG, DMSG, or EMSG switches. You would need the -S variant (SGC160X850TC-S) to enable magnetic sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC160X850TC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.