Airtac SGC Standard Cylinder SGC160X95S
The AirTAC Airtac SGC Standard Cylinder SGC160X95S is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø160mm bore and 95mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ160 mm
- Stroke95 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC160X95S
Delivering 10053 N of push force at 0.5 MPa, this double-acting ISO 15552 tie-rod cylinder is built for heavy-duty automation. Four steel tie rods clamp the aluminum barrel to the covers for high structural rigidity, while the two-way piston seal maintains an internal oil reservoir to maximize service life. Equipped with a G3/4 air port and a 40 mm piston rod, it operates at speeds of 30-500 mm/s.
Because the code includes an S, this unit has a built-in piston magnet ready for CMSG, DMSG, or EMSG position switches. For practical sizing, plan for about 6032 N of real work at 0.5 MPa, which equates to lifting roughly 512 kg vertically with a 2:1 safety margin. The standard TPU seals handle temperatures from -20 to +70 C, though a Viton H option extends this range to 0-150 C.
Airtac SGC Standard Cylinder SGC160X95S Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC160X95S |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø160 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC160X95S
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 160 | Bore size in mm (125 / 160 / 200 / 250). |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC160X95S Is Used
Press Fit Assembly
Drives bearings into heavy machinery housings, utilizing the 10053 N push force to seat components reliably without hydraulic fluid.
Pallet Stopping Gate
Acts as a robust pneumatic stop in high-throughput conveyor lines, absorbing the impact of loaded pallets via its adjustable cushions.
Vertical Lift Platform
Raises material handling platforms, safely lifting approximately 512 kg of payload with a 2:1 vertical safety margin.
Is the Airtac SGC Standard Cylinder SGC160X95S the Right Cylinder?
When sizing this 160 mm bore, verify if the 10053 N push force at 0.5 MPa fits your application; stepping down to the 125 mm bore yields 6136 N, while stepping up to the 200 mm bore provides 15708 N. The 95 mm stroke is well under the 1500 mm maximum, so rod bending is minimal, but always ensure the load is guided to prevent side loads. Because this SKU features the -S magnet, you can directly mount CMSG, DMSG, or EMSG sensors for end-of-stroke detection.
Remember that a standard double-acting cylinder drifts when air pressure is lost or the valve is centered, as the adjustable 50 mm air cushions only decelerate the piston near stroke end and act as neither a lock nor a brake. To suspend a load safely during an emergency stop, integrate an external pilot-operated check valve or a dedicated rod lock.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC160X95S FAQ
The SGC160X95S features a G3/4 air port and delivers a push force of 10053 N and a pull force of 9425 N at 0.5 MPa. At 0.7 MPa, the push force is 14074 N and the pull force is 13194 N. The theoretical maximum force is 2050 kgf at 1.0 MPa.
Yes, it is dimensionally interchangeable per the ISO 15552 mounting interface, allowing it to drop into existing large-bore fixtures using LB, FA, or TC mounts. Additionally, the -S designation means it has a built-in magnet for direct mounting of CMSG, DMSG, or EMSG electronic switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC160X95S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.