Airtac SGC Standard Cylinder SGC200X1000
The AirTAC Airtac SGC Standard Cylinder SGC200X1000 is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 1000mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke1000 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC200X1000
Delivering 15708 N of push force at 0.5 MPa, this double-acting large-bore actuator is built on a genuine ISO 15552 tie-rod platform. Four steel tie rods clamp the aluminium barrel to the front and rear covers, providing the high rigidity needed for heavy thrust, while a two-way piston seal maintains an internal oil reservoir for long service life. Because it uses the standard ISO 15552 mounting interface, it drops directly into existing large-bore fixtures and accessory sets.
With a 1000 mm stroke and a G3/4 port, plan for about 9425 N of real work at 0.5 MPa, which equates to lifting roughly 801 kg vertically with a 2:1 safety margin. The default TPU seals handle temperatures from -20 to +70 C, though a Viton H option extends this to 150 C. Note that this specific SKU lacks the -S magnet, so it cannot host CMSG, DMSG, or EMSG position switches without changing to the sensed variant.
Airtac SGC Standard Cylinder SGC200X1000 Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC200X1000 |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 1000 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC200X1000
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC200X1000 Is Used
Automotive Panel Transfer
Pushes heavy stamped metal body panels across a 1000 mm gap between stamping presses, utilising the 15708 N thrust to move heavy fixtures without stalling.
Pallet Discharge Station
Ejects fully loaded pallets from a wrapping station, using the long 1000 mm stroke to clear the machine envelope before the downstream conveyor engages.
Plastic Injection Mold Extraction
Extracts large molded plastic components from deep injection molds, relying on the rigid tie-rod construction to maintain alignment over the extended 1-metre reach.
Is the Airtac SGC Standard Cylinder SGC200X1000 the Right Cylinder?
When sizing this 200 mm bore, compare it against its neighbours: the 160 mm bore yields 10053 N of push at 0.5 MPa, while the 250 mm bore provides 24543 N. Choose this model when the 160 mm class lacks the necessary thrust for a 1000 mm travel requirement. Because this is a non-sensed SKU without the -S magnet, select an -S version if your application requires CMSG, DMSG, or EMSG switches for end-of-stroke confirmation.
At 1000 mm of travel, the extended piston rod is highly susceptible to side-load damage and bending under offset loads. Always use an external guide or load-bearing rail to support the tooling, and never let the cylinder itself absorb lateral forces. Furthermore, a standard double-acting cylinder drifts when air is lost or the valve is centred; the adjustable 50 mm air cushions only decelerate the piston near the end caps, so fit an external rod lock or pilot-operated check valve if the load must be held in place vertically.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC200X1000 FAQ
The 200 mm bore has a G3/4 air port and an M36x2.0 rod thread. It generates 15708 N push and 15079 N pull at 0.5 MPa, 21991 N push and 21110 N pull at 0.7 MPa, with a theoretical maximum force of 3204 kgf at 1.0 MPa.
No, this specific SKU does not include the -S magnet option, meaning CMSG, DMSG, or EMSG switches cannot be fitted. You must select the SGC200X1000-S variant to enable magnetic position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC200X1000
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.