Airtac SGC Standard Cylinder SGC200X100S
The AirTAC Airtac SGC Standard Cylinder SGC200X100S is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 100mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke100 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC200X100S
Delivering 15708 N of push force at 0.5 MPa, this double-acting large-bore tie-rod cylinder is built for heavy-duty automation. Four steel tie rods clamp the aluminium barrel to the covers, providing the high rigidity needed to handle large-bore thrust without flexing. The standardized ISO 15552 mounting interface means it drops directly into existing large-bore fixtures, simplifying machine upgrades and spare-part logistics.
Because the code ends in -S, a built-in piston magnet enables position tracking with CMSG, DMSG or EMSG switches. The bore uses a G3/4 air port and a two-way piston seal that maintains an internal oil reservoir for long service life. For practical sizing, plan for about 9425 N of real work at 0.5 MPa, which equates to lifting roughly 801 kg vertically with a 2:1 safety margin.
Airtac SGC Standard Cylinder SGC200X100S Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC200X100S |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC200X100S
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC200X100S Is Used
Stamping Press Feed
Drives heavy gauge metal blanks into a forming die, utilizing the full 21991 N push force at 0.7 MPa to shear thick stock.
Pallet Squaring Station
Actuates a massive mechanical pusher to align heavy inbound pallets on a conveyor before automated stretch wrapping.
Injection Mould Clamp
Provides the high thrust required to secure large mould halves together during the high-pressure plastic injection cycle.
Is the Airtac SGC Standard Cylinder SGC200X100S the Right Cylinder?
When sizing this 200 mm bore, verify if the neighbouring bores fit better: the smaller 160 mm yields 10053 N push at 0.5 MPa, while the larger 250 mm provides 24543 N. This model includes the -S magnet, so it is fully compatible with CMSG, DMSG and EMSG sensors for end-of-stroke detection. Mounting options span LB foot, FA/FB flange, CA/CB clevis and TC trunnion styles.
Remember that a standard double-acting cylinder drifts when air pressure is lost or the valve is centred; the adjustable 50 mm air cushions only decelerate the piston near the end caps and do not function as a braking lock. For vertical or suspended loads that must be held in place during an air loss event, install an external pilot-operated check valve or a dedicated rod lock.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC200X100S FAQ
The 200 mm bore has a G3/4 air port and an M36x2.0 rod thread. It generates 15708 N push and 15079 N pull at 0.5 MPa, 21991 N push and 21110 N pull at 0.7 MPa, with a theoretical maximum force of 3204 kgf at 1.0 MPa.
Yes, it is dimensionally interchangeable per the ISO 15552 mounting interface, so it fits standard large-bore fixtures and accessories. The -S suffix denotes a built-in magnet, allowing you to mount CMSG, DMSG or EMSG reed or electronic switches directly onto the barrel for position detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC200X100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.