Airtac SGC Standard Cylinder SGC200X100SNG
The AirTAC Airtac SGC Standard Cylinder SGC200X100SNG is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 100mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke100 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC200X100SNG
Delivering 15708 N of push force at 0.5 MPa, this double-acting large-bore tie-rod cylinder is built for heavy-duty automation. The Ø200 mm bore utilizes a robust four-steel-tie-rod construction, clamping the aluminum barrel to the covers for high structural rigidity under massive thrust. A heterogeneous two-way piston seal maintains an internal oil reservoir, ensuring long operational life. Because it is dimensionally interchangeable per the ISO 15552 mounting interface, it drops directly into existing large-bore fixtures and accessories.
This specific SKU includes a built-in piston magnet for CMSG, DMSG, and EMSG switches, and uses an NBR seal suitable for standard -20 to +70 C environments. It features a G3/4 air port and an M36x2.0 rod-end thread. For practical sizing, plan for about 9425 N of real work at 0.5 MPa, which equates to lifting roughly 801 kg vertically with a 2:1 safety margin.
Airtac SGC Standard Cylinder SGC200X100SNG Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC200X100SNG |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC200X100SNG
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC200X100SNG Is Used
Press Fit Assembly
Drives heavy bearings into automotive transmission housings, utilizing the 15708 N push force to seat components reliably without hydraulic fluid.
Pallet Dispenser
Separates empty pallets from a magazine stack in high-throughput logistics lines, where the 15079 N pull force easily breaks friction.
Injection Mold Clamp
Secures mid-sized mold halves in plastics machinery, leveraging the rigid tie-rod build to withstand repeated high-impact clamping cycles.
Is the Airtac SGC Standard Cylinder SGC200X100SNG the Right Cylinder?
When sizing this 200 mm bore, compare it against its neighbors: a 160 mm bore yields 10053 N push at 0.5 MPa, while stepping up to the 250 mm bore provides 24543 N. This model hits a strong middle ground for high-force needs. It includes the -S magnet for position sensing and the -N NBR seal. Note that a plain SGC cylinder will drift and cannot hold a load if air pressure is lost or the valve is centered; the end-of-stroke air cushion only decelerates the piston. For suspended loads, specify an external rod lock or a pilot-operated check valve. With a 100 mm stroke, side-load risks are minimal, but always ensure rigid mounting using LB foot, FA flange, or TC trunnion options.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC200X100SNG FAQ
This Ø200 mm bore cylinder features a G3/4 air port and an M36x2.0 piston rod. It generates 15708 N push and 15079 N pull at 0.5 MPa, 21991 N push and 21110 N pull at 0.7 MPa, with a theoretical maximum force of 3204 kgf at 1.0 MPa.
Yes, it is dimensionally interchangeable per the ISO 15552 mounting interface, so standard large-bore accessories fit perfectly. This SKU includes the -S magnet, allowing you to mount CMSG, DMSG, or EMSG electronic or reed switches directly onto the barrel.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC200X100SNG
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.