Airtac SGC Standard Cylinder SGC200X1040S
The AirTAC Airtac SGC Standard Cylinder SGC200X1040S is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 1040mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke1040 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC200X1040S
Generating 15708 N of push force at 0.5 MPa, this double-acting large-bore ISO 15552 tie-rod cylinder handles heavy-duty linear motion across its 1040 mm stroke. Four steel tie rods clamp the aluminium barrel to the covers for high structural rigidity, while a two-way piston seal maintains an internal oil reservoir for long service life. Plan for about 9425 N of real work at 0.5 MPa, which equates to lifting roughly 801 kg vertically with a 2:1 safety margin.
The built-in piston magnet (-S) directly supports CMSG, DMSG, and EMSG switches for position sensing. Fluid is filtered air, operating pressure spans 0.15-1.0 MPa, and the standard TPU seals handle -20 to +70 C. A Viton H option raises the thermal limit to 0-150 C for high-temperature environments.
Airtac SGC Standard Cylinder SGC200X1040S Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC200X1040S |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 1040 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC200X1040S
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×1040 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC200X1040S Is Used
Automotive Press Loading
Pushes heavy stamping blanks into large forming presses, utilizing the 15708 N push force at 0.5 MPa to move heavy steel sheets reliably.
Pallet Dispenser Mechanism
Extends across the 1040 mm stroke to separate and feed empty pallets into high-throughput packaging lines, requiring external guides to support the long rod.
Injection Mold Actuation
Drives large core pulls or heavy mold halves in plastic injection machinery, using the -S magnet to trigger DMSG sensors for precise sequential timing.
Is the Airtac SGC Standard Cylinder SGC200X1040S the Right Cylinder?
This 200 mm bore sits between the 160 mm option (10053 N push @0.5 MPa) and the 250 mm model (24543 N push @0.5 MPa). Because this SKU features a 1040 mm stroke, you must use an external guide or rod-end support to prevent side-load bending under such a long extension. The adjustable 50 mm air cushions at both ends decelerate the piston near stroke end, but they do not lock the load; if air is lost or the valve is centred, the rod drifts. Use an external rod lock or pilot-operated check valve for secure vertical holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC200X1040S FAQ
It features a G3/4 air port. The thrust ratings are 15708 N push and 15079 N pull at 0.5 MPa, 21991 N push and 21110 N pull at 0.7 MPa, and a theoretical maximum force of 3204 kgf at 1.0 MPa.
Yes, it is dimensionally interchangeable per the ISO 15552 mounting interface, allowing it to drop into existing large-bore fixtures. Its rigid tie-rod build accepts LB foot, FA flange, and TC trunnion mounts.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC200X1040S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.