Airtac SGC Standard Cylinder SGC200X1200
The AirTAC Airtac SGC Standard Cylinder SGC200X1200 is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 1200mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke1200 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC200X1200
Generating 15708 N of push force at 0.5 MPa, this double-acting large-bore actuator tackles heavy-duty automation with ease. The Ø200 mm bore utilizes a robust tie-rod construction, where four steel rods clamp the aluminum barrel to the covers for exceptional rigidity under high thrust. Because this specific SKU lacks the -S magnet, it cannot accept CMSG, DMSG, or EMSG position switches.
Designed around the ISO 15552 mounting interface, it drops seamlessly into existing large-bore fixtures and shares standardized accessory dimensions. The two-way piston seal incorporates an oil reservoir for sustained lubrication and long service life. Plan for roughly 9425 N of real work at 0.5 MPa, which translates to lifting about 801 kg vertically with a 2:1 safety margin. The G3/4 air port and M36x2.0 rod thread ensure high flow and secure mechanical connections.
Airtac SGC Standard Cylinder SGC200X1200 Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC200X1200 |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 1200 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC200X1200
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×1200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC200X1200 Is Used
Press Ejection
Provides the long 1200 mm reach and 15708 N thrust needed to push heavy formed parts completely out of large stamping presses.
Pallet Dispenser
Handles the extended stroke required to separate and feed empty pallets from tall magazine stacks in automated distribution lines.
Heavy Log Transfer
Deploys across wide conveyor belts in sawmills to push large timber logs onto secondary processing tracks using 21991 N at 0.7 MPa.
Is the Airtac SGC Standard Cylinder SGC200X1200 the Right Cylinder?
When sizing this series, stepping down to the Ø160 bore reduces the 0.5 MPa push force to 10053 N, while moving up to the Ø250 bore increases it to 24543 N. This 1200 mm stroke demands careful attention to side loads; always use an external guide or rod-end support to prevent rod bending and premature seal wear over such a long extension. Remember that the adjustable air cushion only decelerates the piston near the stroke ends and does not function as a brake. If the application requires the load to be held vertically during a loss of air pressure or valve centering, you must integrate an external rod lock or a pilot-operated check valve, as the piston will drift otherwise.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC200X1200 FAQ
The SGC200X1200 delivers 15708 N push and 15079 N pull at 0.5 MPa, or 21991 N push and 21110 N pull at 0.7 MPa. The theoretical maximum force is 3204 kgf at 1.0 MPa. It features a G3/4 air port and an M36x2.0 piston rod thread.
No, because this specific SKU does not include the -S magnet option, it cannot accept CMSG, DMSG, or EMSG magnetic switches. You would need to specify the -S variant for position sensing capabilities.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC200X1200
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.