Airtac SGC Standard Cylinder SGC200X130
The AirTAC Airtac SGC Standard Cylinder SGC200X130 is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 130mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke130 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC200X130
Delivering 15708 N of push force at 0.5 MPa, this double-acting large-bore cylinder is built for heavy-duty automation. The Ø200 mm bore uses a G3/4 air port and a 50 mm adjustable air cushion at both ends to tame end-of-stroke impact. Four steel tie rods clamp the aluminum barrel to the covers, providing high rigidity under large-bore thrust, while the two-way piston seal maintains an internal oil reservoir for long service life. Dimensionally interchangeable per the ISO 15552 mounting interface, it drops directly into existing large-bore fixtures.
Because this specific SKU lacks the -S suffix, it cannot accept CMSG, DMSG, or EMSG magnetic switches. For real-world sizing, plan for about 9425 N of actual work at 0.5 MPa, or roughly 801 kg lifted vertically with a 2:1 safety margin. The default TPU seal handles -20 to +70 C, with a Viton H option available for 0-150 C environments.
Airtac SGC Standard Cylinder SGC200X130 Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC200X130 |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC200X130
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC200X130 Is Used
Automotive Stamping Press
Provides 21991 N of push force at 0.7 MPa to form heavy-gauge steel body panels, utilizing the 50 mm adjustable cushion to prevent endcap damage.
Injection Mold Clamping
Secures large industrial molds with 9425 N of safe working force, relying on the rigid four-tie-rod construction to resist deflection under high clamping pressure.
Palletizer Stop Gate
Acts as a heavy-duty stopper for fully loaded pallets, absorbing kinetic energy through the ISO 15552 interface and decelerating smoothly via adjustable air cushions.
Is the Airtac SGC Standard Cylinder SGC200X130 the Right Cylinder?
When sizing this 200 mm bore, compare it against its neighbors: a 160 mm bore yields 10053 N push at 0.5 MPa, while stepping up to the 250 mm bore provides 24543 N. This model hits a strong middle ground for presses and heavy clamps. Note that a plain SGC cylinder does not hold its position if air is lost or the valve is centered—the piston will drift, and the air cushion only decelerates the stroke end, acting as a brake. For suspended or vertical loads, integrate an external rod lock or a pilot-operated check valve. Since this SKU has no magnet, position sensing requires either external limit switches or upgrading to the -S variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC200X130 FAQ
The SGC200X130 features a G3/4 air port and an M36x2.0 rod thread. It delivers 15708 N push and 15079 N pull at 0.5 MPa, 21991 N push and 21110 N pull at 0.7 MPa, with a theoretical maximum of 3204 kgf at 1.0 MPa.
No, this specific SKU lacks the internal magnet, so CMSG, DMSG, or EMSG switches cannot be used. You must select the -S variant (SGC200X130-S) to enable magnetic sensing. The four steel tie rods still ensure high rigidity regardless of sensor choice.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC200X130
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.