Airtac SGC Standard Cylinder SGC200X130S
The AirTAC Airtac SGC Standard Cylinder SGC200X130S is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 130mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke130 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC200X130S
Delivering 15708 N of push force at 0.5 MPa, this double-acting 200 mm bore actuator handles heavy-duty automation with ease. It features a genuine ISO 15552 mounting interface, dropping directly into existing large-bore fixtures without custom bracketry. Four steel tie rods clamp the aluminum barrel to the covers for high structural rigidity, while the two-way piston seal maintains an internal oil reservoir for long service life. Because this SKU includes the -S magnet, it is fully ready for CMSG, DMSG, or EMSG position switches.
With a 130 mm stroke and a G3/4 air port, the cylinder operates at speeds of 30-500 mm/s. The standard TPU seals handle temperatures from -20 to +70 C, though Viton H options extend this to 150 C. For practical sizing, plan for about 9425 N of real work at 0.5 MPa, which equates to lifting roughly 801 kg vertically with a 2:1 safety margin.
Airtac SGC Standard Cylinder SGC200X130S Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC200X130S |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC200X130S
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC200X130S Is Used
Stamping Press Feeders
Pushes heavy coil stock into mechanical presses, utilizing the 15708 N push force at 0.5 MPa to move steel blanks reliably.
Pallet Dispenser Gates
Actuates loaded pallet flow gates in high-throughput distribution centers, where the 801 kg vertical lift capacity handles heavy wood pallets.
Injection Mold Clamps
Secures large injection molding tooling halves, relying on the rigid four tie-rod construction to withstand 21991 N of thrust at 0.7 MPa.
Is the Airtac SGC Standard Cylinder SGC200X130S the Right Cylinder?
When sizing this 200 mm bore unit, compare it against its neighbors: the 160 mm bore provides 10053 N push at 0.5 MPa, while the massive 250 mm bore offers 24543 N. Choose the 200 mm when you need substantial thrust—like the 21991 N available at 0.7 MPa—without stepping up to the heavier 250 mm frame. The M36x2.0 piston rod and 50 mm adjustable air cushions at both ends manage end-of-stroke impact effectively.
Remember that a standard double-acting cylinder drifts when air is removed or a valve is centered; the cushions only decelerate the piston near the end caps and do not function as a brake. If your application requires vertical load holding on air loss, install an external pilot-operated check valve or a dedicated rod lock. The included -S magnet allows seamless integration of CMSG or DMSG sensors for end-position confirmation.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC200X130S FAQ
This 200 mm bore cylinder features a G3/4 air port and an M36x2.0 rod thread. It delivers 15708 N push and 15079 N pull at 0.5 MPa, 21991 N push and 21110 N pull at 0.7 MPa, with a theoretical maximum of 3204 kgf at 1.0 MPa.
Yes, it is dimensionally interchangeable per the ISO 15552 mounting interface, accepting standard LB foot, FA flange, or TC trunnion brackets. The -S suffix denotes a built-in piston magnet, enabling direct mounting of CMSG, DMSG, or EMSG electronic switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC200X130S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.