Airtac SGC Standard Cylinder SGC200X150
The AirTAC Airtac SGC Standard Cylinder SGC200X150 is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 150mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke150 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC200X150
Delivering 15708 N of push force at 0.5 MPa, this large-bore double-acting cylinder is built around a genuine ISO 15552 mounting interface, ensuring it drops directly into standard heavy-duty fixtures. Four steel tie rods clamp the aluminum barrel to the covers for high structural rigidity, while a two-way piston seal maintains an internal oil reservoir for long service life. Plan for about 9425 N of real work at 0.5 MPa, which safely lifts roughly 801 kg vertically with a 2:1 margin.
The Ø200 mm bore utilizes a G3/4 air port and a 40 mm hardened chrome piston rod with an M36x2.0 thread. Because this specific SKU lacks the -S magnet, it cannot accept CMSG, DMSG, or EMSG magnetic switches. The standard TPU seal handles temperatures from -20 to +70 C, with a Viton H option available for 0-150 C environments.
Airtac SGC Standard Cylinder SGC200X150 Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC200X150 |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC200X150
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC200X150 Is Used
Heavy Stamping Presses
Drives large stamping dies requiring 15708 N of push force at 0.5 MPa, utilizing the 150 mm stroke to form thick gauge steel.
Pallet Stopper Gates
Acts as a heavy-duty stopper arm on high-capacity conveyor lines, easily handling the impact of 800 kg pallets.
Injection Mold Clamping
Provides auxiliary clamping force on large injection molding machines, leveraging the rigid four tie-rod construction.
Is the Airtac SGC Standard Cylinder SGC200X150 the Right Cylinder?
When sizing this 200 mm bore, verify your actual load requirements against its neighbors: the smaller Ø160 bore yields 10053 N push at 0.5 MPa, while the larger Ø250 bore provides 24543 N. If your mechanism requires position holding upon air loss, note that this standard cylinder will drift and the end-of-stroke cushions only decelerate the piston without locking it; an external rod lock or pilot-operated check valve is required for secure load holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC200X150 FAQ
The Ø200 mm bore features a G3/4 port and delivers 15708 N push / 15079 N pull at 0.5 MPa, 21991 N push / 21110 N pull at 0.7 MPa, with a theoretical maximum of 3204 kgf at 1.0 MPa.
No, this specific SKU does not include the -S magnet option, so it cannot accept CMSG, DMSG, or EMSG switches. You would need the -S variant for position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC200X150
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.