Airtac SGC Standard Cylinder SGC200X150FA
The AirTAC Airtac SGC Standard Cylinder SGC200X150FA is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 150mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke150 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC200X150FA
Delivering 15708 N of push force at 0.5 MPa, this double-acting large-bore cylinder is built around a genuine ISO 15552 mounting interface for seamless fixture integration. The SGC200X150FA features a robust tie-rod construction where four steel rods clamp the aluminum barrel to the covers, while a two-way piston seal maintains an internal oil reservoir for extended operational life.
Equipped with a front FA flange mount and a G3/4 air port, it handles heavy thrust tasks efficiently. For practical sizing, plan for about 9425 N of real work at 0.5 MPa, which equates to lifting roughly 801 kg vertically with a 2:1 safety margin. Note that this specific SKU lacks the -S magnet, meaning it cannot support CMSG, DMSG, or EMSG magnetic switches.
Airtac SGC Standard Cylinder SGC200X150FA Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC200X150FA |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC200X150FA
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC200X150FA Is Used
Press Fit Assembly
Drives heavy-duty bearings into automotive transmission housings using its 21991 N push force at 0.7 MPa.
Injection Mold Clamping
Secures large resin casting molds via the front FA flange mount, utilizing the rigid four-tie-rod barrel design.
Pallet Dispenser
Pushes stacked empty pallets into the loading lane, safely handling the 801 kg vertical lift equivalent.
Is the Airtac SGC Standard Cylinder SGC200X150FA the Right Cylinder?
When sizing this 200 mm bore option, compare it against its neighbors: the 160 mm bore yields 10053 N of push at 0.5 MPa, whereas the larger 250 mm bore provides 24543 N. If your application requires position sensing, you must select the -S magnet variant, as this base SKU cannot accept sensors. Furthermore, because a standard double-acting cylinder will drift and lose its load when air pressure is lost or a valve is centered, you should incorporate an external rod lock or a pilot-operated check valve for secure vertical holding. The integrated air cushions only decelerate the piston near the stroke ends and do not function as a braking mechanism.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC200X150FA FAQ
The 200 mm bore yields a push force of 15708 N and a pull force of 15079 N at 0.5 MPa. At 0.7 MPa, push is 21991 N and pull is 21110 N. The theoretical maximum force is 3204 kgf at 1.0 MPa. It uses a G3/4 air port and features a 50 mm adjustable air cushion at both ends.
No, this specific SKU does not include the -S magnet option, so it cannot accommodate CMSG, DMSG, or EMSG magnetic switches. You would need to specify the -S variant for sensor compatibility. The cylinder is dimensionally interchangeable per the ISO 15552 mounting interface, allowing it to drop into existing large-bore fixtures.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC200X150FA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.