Airtac SGC Standard Cylinder SGC200X150H
The AirTAC Airtac SGC Standard Cylinder SGC200X150H is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 150mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke150 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC200X150H
Delivering 15708 N of push force at 0.5 MPa, this double-acting ISO 15552 tie-rod cylinder is built for heavy-duty automation. Four steel tie rods clamp the aluminium barrel to the covers for high rigidity, while the two-way piston seal maintains an internal oil reservoir for long service life. The Viton H seal option equips this specific unit for 0-150 C high-temperature environments.
Featuring a 200 mm bore, a 40 mm rod, and a G3/4 port, it generates substantial thrust. For practical sizing, plan for about 9425 N of real work at 0.5 MPa, which safely lifts roughly 801 kg vertically with a 2:1 margin. Note that this SKU lacks the -S magnet, so it cannot accept CMSG, DMSG, or EMSG position switches without upgrading to the magnetized variant.
Airtac SGC Standard Cylinder SGC200X150H Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC200X150H |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC200X150H
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC200X150H Is Used
Injection Moulding Extraction
Handles heavy plastic part ejection from large presses, utilizing the 21991 N push force at 0.7 MPa to reliably pull bulky moulded components out of hot environments.
Heavy Stamping Press Feed
Pushes thick metal blanks into a forming station, where the rigid tie-rod construction withstands high impact forces and the Viton H seal resists ambient heat.
Pallet Dispenser Actuation
Lifts and separates empty pallets in automated distribution lines, easily managing the 801 kg safe vertical lift capacity calculated at a 2:1 margin.
Is the Airtac SGC Standard Cylinder SGC200X150H the Right Cylinder?
When sizing this 200 mm bore unit, verify if the 160 mm bore (10053 N push at 0.5 MPa) is sufficient, or if you need to step up to the 250 mm bore (24543 N push at 0.5 MPa) for heavier loads. The 150 mm stroke keeps the side-load risk low, but always ensure rigid mounting using LB foot, FA flange, or TC trunnion brackets per the ISO 15552 interface.
Because this is a double-acting cylinder, the piston will drift if air pressure is lost or the valve is centered; the end-of-stroke air cushions only decelerate the piston and do not function as a brake. To suspend a vertical load safely, install an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC200X150H FAQ
This 200 mm bore cylinder features a G3/4 port and a 40 mm rod. It delivers 15708 N push and 15079 N pull at 0.5 MPa, 21991 N push and 21110 N pull at 0.7 MPa, with a theoretical maximum force of 3204 kgf at 1.0 MPa.
This specific SKU lacks the -S magnet, so it cannot accept CMSG, DMSG, or EMSG switches. It does include the Viton H seal, raising the operating temperature range to 0-150 C. For position sensing in high heat, you must switch to the -S magnet variant and ensure compatible high-temperature switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC200X150H
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.