Airtac SGC Standard Cylinder SGC200X180FB
The AirTAC Airtac SGC Standard Cylinder SGC200X180FB is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 180mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke180 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC200X180FB
Delivering 15708 N of push force at 0.5 MPa, this double-acting tie-rod cylinder brings serious thrust to heavy industrial tasks. Four steel tie rods clamp the aluminium barrel to the front and rear covers, providing the high rigidity needed to handle large-bore pressure without flexing. The standardized ISO 15552 mounting interface means it drops directly into existing large-bore fixture layouts, while a two-way piston seal maintains an internal oil reservoir for long service life.
Equipped with a G3/4 port and a 50 mm adjustable air cushion at both ends to absorb impact near stroke limits, it operates smoothly at 30-500 mm/s. For practical sizing, plan for about 9425 N of real work at 0.5 MPa, which equates to lifting roughly 801 kg vertically with a 2:1 safety margin. Note that this specific SKU lacks a magnet and therefore cannot support CMSG, DMSG, or EMSG position switches.
Airtac SGC Standard Cylinder SGC200X180FB Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC200X180FB |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 180 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC200X180FB
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×180 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC200X180FB Is Used
Press Fit Assembly
Drives heavy bearings into automotive transmission housings, utilizing the 15708 N push force to seat components reliably.
Pallet Stopper Gate
Acts as a robust 180 mm stroke blocking gate in high-throughput logistics conveyors, halting loaded pallets via the FB flange mount.
Injection Mold Clamp
Secures large mold halves in plastics machinery, using its 3204 kgf maximum theoretical force to maintain alignment under high pressure.
Is the Airtac SGC Standard Cylinder SGC200X180FB the Right Cylinder?
When sizing this 200 mm bore unit against the SGC family, the smaller 160 mm option yields 10053 N of push at 0.5 MPa, whereas stepping up to the 250 mm bore provides 24543 N. This model is supplied with an FB front flange mounting interface, ensuring secure rigid fixation for heavy lateral loads. Because this SKU does not include the -S magnet option, it cannot accept magnetic sensors; if position feedback is required, an -S variant is necessary.
Remember that a standard pneumatic cylinder cannot hold a load in place if air pressure drops or the valve is centred, as the piston will drift. The end-of-stroke cushions only decelerate the piston and do not function as a locking brake. To suspend a load safely, incorporate an external rod lock or a pilot-operated check valve into your circuit.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC200X180FB FAQ
This 200 mm bore cylinder features a G3/4 air port and an M36x2.0 rod thread. It generates 15708 N push and 15079 N pull at 0.5 MPa, 21991 N push and 21110 N pull at 0.7 MPa, with a theoretical maximum force of 3204 kgf at 1.0 MPa.
No, this specific SKU does not include a magnet, so it cannot accept CMSG, DMSG, or EMSG switches. You would need the -S variant for position sensing. It uses an ISO 15552 mounting interface for fixture interchangeability and features a rigid four-tie-rod build.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC200X180FB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.