Airtac SGC Standard Cylinder SGC200X200
The AirTAC Airtac SGC Standard Cylinder SGC200X200 is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 200mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke200 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC200X200
Delivering 15708 N of push force at 0.5 MPa, this double-acting single-rod actuator handles heavy-duty automation tasks with ease. The Ø200 mm bore features a G3/4 air port and a robust tie-rod design, where four steel rods clamp the aluminium barrel to the covers for exceptional structural rigidity under high thrust. Its two-way piston seal also maintains an internal oil reservoir to ensure long component life.
Because it follows the standardized ISO 15552 mounting interface, this cylinder drops directly into existing large-bore fixtures and shares common accessories. Plan for roughly 9425 N of real work at 0.5 MPa, which safely lifts about 801 kg vertically with a 2:1 margin. Note that this specific SKU lacks the -S magnet, so it cannot host CMSG, DMSG, or EMSG magnetic switches without upgrading to the sensed variant.
Airtac SGC Standard Cylinder SGC200X200 Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC200X200 |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC200X200
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC200X200 Is Used
Automotive Press Die Handling
Clamps and positions heavy stamping dies on automotive assembly lines, utilizing the 15708 N push force to secure large steel plates during forming operations.
Palletized Logistics Sorting
Diverts heavy loaded pallets across high-speed conveyor networks, where the 200 mm bore provides the necessary thrust to move substantial weights reliably.
Injection Mould Extraction
Ejects large moulded plastic components from heavy industrial injection moulding machines, relying on the rigid four-tie-rod barrel to withstand repetitive high-impact cycles.
Is the Airtac SGC Standard Cylinder SGC200X200 the Right Cylinder?
When sizing this 200 mm bore model, compare it against its neighbours: the 160 mm bore yields 10053 N of push at 0.5 MPa, while the massive 250 mm bore provides 24543 N. Choose this SGC200X200 when your application demands the 15708 N output but not the full 24543 N of the largest size. For any stroke length at or above 200 mm, carefully evaluate side loads and use external guide rails to prevent rod bending, as the piston must remain properly supported. Furthermore, a standard cylinder drifts when air is lost or a valve is centred—the adjustable air cushion only decelerates the piston near stroke end, so install an external rod lock or pilot-operated check valve if the load must be held in place.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC200X200 FAQ
This double-acting cylinder features a 200 mm bore, a 40 mm piston rod, and a G3/4 air port. It generates 15708 N push and 15079 N pull at 0.5 MPa, increasing to 21991 N push and 21110 N pull at 0.7 MPa, with a theoretical maximum of 3204 kgf at 1.0 MPa. The adjustable air cushion is 50 mm at both ends, and it operates at speeds between 30-500 mm/s.
This specific SKU does not include a magnet, so it cannot support CMSG, DMSG, or EMSG switches; you must select the -S variant for sensing capabilities. However, it is dimensionally interchangeable per the ISO 15552 mounting interface, allowing it to use standard LB foot, FA flange, or TC trunnion accessories, and features a robust tie-rod build with a standard TPU seal for temperatures from -20 to +70 C.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC200X200
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.