Airtac SGC Standard Cylinder SGC200X220
The AirTAC Airtac SGC Standard Cylinder SGC200X220 is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 220mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke220 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC200X220
Delivering 15708 N of push force at 0.5 MPa, this double-acting large-bore cylinder handles heavy industrial loads with ease. The Ø200 mm bore uses a G3/4 air port and an M36x2.0 rod thread, driven by four steel tie rods that clamp the aluminium barrel to the covers for high structural rigidity. A two-way piston seal maintains an internal oil reservoir to ensure long operational life. Because it is dimensionally interchangeable per the ISO 15552 mounting interface, it drops directly into existing large-bore fixtures without custom brackets.
For practical sizing, plan for about 9425 N of real work at 0.5 MPa, which safely lifts roughly 801 kg vertically with a 2:1 margin. This SKU ships without a magnet, so it cannot host CMSG, DMSG, or EMSG sensors; add the -S variant if you require position detection. The standard TPU seal handles temperatures from -20 to +70 C, while a Viton H option extends this range up to 150 C for high-heat environments.
Airtac SGC Standard Cylinder SGC200X220 Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC200X220 |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 220 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC200X220
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×220 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC200X220 Is Used
Heavy Stamping Press
Provides the 15708 N push force at 0.5 MPa required to actuate large heavy-duty stamping dies over a 220 mm stroke.
Pallet Stopper Gate
Secures and halts loaded pallets on high-capacity conveyor lines, utilising its robust tie-rod build to absorb severe impact loads.
Injection Mould Clamp
Delivers the high clamping thrust needed to hold large mould halves together securely during industrial plastic injection cycles.
Is the Airtac SGC Standard Cylinder SGC200X220 the Right Cylinder?
When sizing this 220 mm stroke model, compare it against its neighbours: the Ø160 bore provides 10053 N of push at 0.5 MPa, while the Ø250 bore offers 24543 N if your application demands more power. If you need to hold a load vertically during air loss or valve centring, remember that a standard cylinder will drift; the adjustable air cushion only decelerates the piston near stroke end and acts purely as an end-of-stroke buffer. For secure load holding, install an external rod lock or a pilot-operated check valve. Since this specific SKU lacks the -S magnet, you must select a magnet-equipped version to use magnetic switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC200X220 FAQ
The SGC200X220 features a G3/4 air port and an M36x2.0 rod thread. It delivers 15708 N push and 15079 N pull at 0.5 MPa, 21991 N push and 21110 N pull at 0.7 MPa, with a theoretical maximum force of 3204 kgf at 1.0 MPa.
It is dimensionally interchangeable per the ISO 15552 mounting interface, so it fits standard large-bore accessories. However, because this specific SKU lacks the -S magnet, it cannot support CMSG, DMSG, or EMSG magnetic switches; you must specify the -S version for position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC200X220
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.