Airtac SGC Standard Cylinder SGC200X25S
The AirTAC Airtac SGC Standard Cylinder SGC200X25S is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 25mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke25 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC200X25S
Delivering 15708 N of push force at 0.5 MPa, this double-acting AirTAC large-bore cylinder handles heavy industrial tasks with ease. The SGC200X25S features a robust tie-rod design where four steel rods clamp the aluminum barrel to the covers, ensuring high structural rigidity under extreme thrust. It also integrates a two-way piston seal that maintains an internal oil reservoir for continuous lubrication and extended service life.
Because this SKU includes the -S magnet, it is fully ready for CMSG, DMSG, or EMSG position switches without further modification. Plan for roughly 9425 N of real work at 0.5 MPa, which means it can safely lift about 801 kg vertically with a 2:1 safety margin. The unit uses a G3/4 air port, an M36x2.0 rod thread, and adjustable 50 mm air cushions at both ends to decelerate the payload smoothly.
Airtac SGC Standard Cylinder SGC200X25S Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC200X25S |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC200X25S
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC200X25S Is Used
Heavy-Duty Stamping Press
Ideal for short-stroke metal forming, delivering 21991 N of thrust at 0.7 MPa to punch or stamp thick plate materials in a single rapid motion.
Pallet Diverting Gate
Uses the 25 mm stroke to rapidly extend a heavy diverting lug on a high-throughput packaging line, shifting loaded pallets onto secondary tracks.
Industrial Parts Clamp
Secures large fabricated steel beams within a machining fixture, utilizing the built-in magnet for DMSG sensors to confirm clamp engagement before milling begins.
Is the Airtac SGC Standard Cylinder SGC200X25S the Right Cylinder?
Choosing this 200 mm bore provides massive output, but sizing correctly is critical. If your application requires less force, the smaller 160 mm bore generates 10053 N of push at 0.5 MPa; if you need even more power, stepping up to the 250 mm bore yields 24543 N. This specific 25 mm stroke is ideal for short clamping or pressing motions where a compact retracted length is desired. Since the stroke is well under 500 mm, rod-bending side loads are minimal, but always ensure the load is guided to prevent premature seal wear.
Remember that the adjustable air cushion only slows the piston near the end of travel and does not function as a braking device. If the air supply is lost or the valve is centered, the piston will drift, so you must incorporate an external rod lock or a pilot-operated check valve to suspend any vertical load safely.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC200X25S FAQ
This 200 mm bore model features a G3/4 air port and an M36x2.0 rod thread. It generates a push force of 15708 N and a pull force of 15079 N at 0.5 MPa. At 0.7 MPa, the push force is 21991 N and the pull force is 21110 N. The theoretical maximum force is 3204 kgf at 1.0 MPa.
Yes, it is dimensionally interchangeable per the ISO 15552 mounting interface, allowing it to drop directly into existing large-bore ISO 15552 fixtures and mounting brackets like FA flanges or TC trunnions. Additionally, the -S suffix indicates a built-in piston magnet, enabling the use of CMSG, DMSG, or EMSG electronic or reed switches for position detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC200X25S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.