Airtac SGC Standard Cylinder SGC200X280S
The AirTAC Airtac SGC Standard Cylinder SGC200X280S is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 280mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke280 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC200X280S
Delivering 15708 N of push force at 0.5 MPa, this double-acting large-bore cylinder is built around a genuine ISO 15552 mounting interface, ensuring it drops seamlessly into existing heavy-duty fixtures. Four steel tie rods clamp the aluminium barrel to the front and rear covers, providing the high rigidity needed to handle massive thrust loads without flexing. The two-way piston seal incorporates an oil reservoir for continuous lubrication, extending operational life in demanding industrial environments.
Because this SKU includes the -S magnet, it is fully primed for CMSG, DMSG, or EMSG position switches. For practical sizing, plan for about 9425 N of real work at 0.5 MPa, which equates to lifting roughly 801 kg vertically with a 2:1 safety margin. The G3/4 air port and M36x2.0 rod thread supply the volume and mechanical strength required for high-cycle automation.
Airtac SGC Standard Cylinder SGC200X280S Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC200X280S |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 280 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC200X280S
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×280 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC200X280S Is Used
Automotive Press Demolding
Pushes heavy stamped body panels out of forming dies using 15708 N of force at 0.5 MPa, relying on the rigid tie-rod frame to resist deflection during high-speed extraction.
Pallet Dispenser Mechanism
Separates empty pallets from a magazine stack, where the 280 mm stroke provides the exact travel needed to kick the bottom pallet onto a transfer chain.
Heavy Gauge Metal Bending
Acts as the primary motion driver for a heavy-duty press brake, utilizing the G3/4 port for rapid air filling to maintain throughput on thick steel plates.
Is the Airtac SGC Standard Cylinder SGC200X280S the Right Cylinder?
When sizing this 200 mm bore actuator, compare your actual load against its neighbours: the 160 mm bore yields 10053 N of push at 0.5 MPa, while the 250 mm bore jumps to 24543 N. If your mechanism experiences air loss or the valve is centred, the piston will drift downward—the adjustable air cushion only decelerates the stroke near the end points and acts purely as an end-of-stroke buffer, never as a locking brake. To suspend a load safely mid-stroke, integrate an external pilot-operated check valve or a dedicated rod lock.
This 280 mm stroke variant operates efficiently within the 30-500 mm/s speed range. Although 280 mm is well under the 1500 mm maximum standard stroke, always verify that your guiding structure prevents side loads from bending the Ø40 mm piston rod. The included -S magnet allows direct mounting of CMSG, DMSG, or EMSG sensors for precise end-position detection.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC200X280S FAQ
The 200 mm bore generates 15708 N push and 15079 N pull at 0.5 MPa, and 21991 N push and 21110 N pull at 0.7 MPa. The theoretical maximum force is 3204 kgf at 1.0 MPa. It uses a G3/4 air port and an M36x2.0 rod-end thread.
Yes, the -S suffix means it has a built-in magnet for CMSG, DMSG, or EMSG switches. It is dimensionally interchangeable per the ISO 15552 mounting interface, allowing it to use the same mounting accessories and fixtures as other standard ISO 15552 large-bore cylinders.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC200X280S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.