Airtac SGC Standard Cylinder SGC200X30
The AirTAC Airtac SGC Standard Cylinder SGC200X30 is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 30mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke30 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC200X30
Delivering 15708 N of push force at 0.5 MPa, this 200 mm bore double-acting actuator is engineered for heavy-duty short-stroke tasks. It features a robust tie-rod construction where four steel rods clamp the aluminium barrel to the covers, ensuring high rigidity under intense thrust. The two-way piston seal incorporates an oil reservoir for continuous lubrication and extended service life. Because this SKU lacks the -S suffix, it cannot accept magnetic position switches; adding the -S variant enables CMSG, DMSG or EMSG sensors.
For practical sizing, plan for about 9425 N of real work at 0.5 MPa, which equates to lifting roughly 801 kg vertically with a 2:1 safety margin. The cylinder operates at 30-500 mm/s, uses a G3/4 air port, and carries an M36x2.0 rod thread. Standard TPU seals handle temperatures from -20 to +70 C, while Viton H options extend this to 150 C.
Airtac SGC Standard Cylinder SGC200X30 Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC200X30 |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC200X30
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×30 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC200X30 Is Used
Stamping Press Ejection
Uses the 30 mm short stroke and 15708 N push force to rapidly eject thick metal blanks from a heavy stamping die.
Hydraulic Press Clamping
Secures large workpieces in a hydraulic press fixture, utilizing the rigid four tie-rod build to withstand high impact loads.
Heavy Gauge Door Latching
Actuates a heavy-duty mechanical latch on industrial furnace doors, benefiting from the 3204 kgf maximum theoretical holding capacity.
Is the Airtac SGC Standard Cylinder SGC200X30 the Right Cylinder?
When sizing this 200 mm bore unit, verify if the 15708 N push at 0.5 MPa is sufficient, or if the larger 250 mm bore (offering 24543 N) is required for heavier loads. If your application is lighter, the 160 mm bore provides 10053 N and might be a more efficient choice. This model has a very short 30 mm stroke, which minimizes rod-bending risks, but always ensure the load is guided to prevent side-loading. Since this specific SKU has no internal magnet, it cannot host CMSG or DMSG sensors; choose an SGC200X30-S if electronic position feedback is needed. Remember that the adjustable air cushion only decelerates the piston near the stroke end and does not function as a brake; for holding a load vertically, an external rod lock or pilot-operated check valve is required.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC200X30 FAQ
The SGC200X30 delivers a push force of 15708 N and a pull force of 15079 N at 0.5 MPa. At 0.7 MPa, the push is 21991 N and the pull is 21110 N. The theoretical maximum force is 3204 kgf at 1.0 MPa. It uses a G3/4 air port and features an M36x2.0 rod thread.
This specific SKU lacks the internal magnet, so it cannot accept CMSG, DMSG, or EMSG switches; you would need the SGC200X30-S variant for sensing. Additionally, the double-acting design does not hold position if air pressure is lost, as the adjustable air cushion only decelerates the piston near the end of stroke rather than locking it. Use an external rod lock for secure load holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC200X30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.