Airtac SGC Standard Cylinder SGC200X300S
The AirTAC Airtac SGC Standard Cylinder SGC200X300S is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 300mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke300 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC200X300S
Delivering 15708 N of push force at 0.5 MPa, this double-acting large-bore actuator utilizes a genuine ISO 15552 mounting interface to drop directly into existing heavy-duty fixtures. Four steel tie rods clamp the aluminum barrel to the covers, providing the high rigidity needed to handle massive thrust, while a two-way piston seal maintains an internal oil reservoir for long service life. Equipped with a G3/4 air port and a 300 mm stroke, it integrates seamlessly into demanding layouts.
For practical sizing, plan for roughly 9425 N of real work at 0.5 MPa, which safely lifts about 801 kg vertically with a 2:1 margin. Because this SKU includes the -S magnet, it supports CMSG, DMSG, and EMSG position switches. The default TPU seals handle temperatures from -20 to +70 C, though a Viton H option extends this range up to 150 C for heated environments.
Airtac SGC Standard Cylinder SGC200X300S Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC200X300S |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 300 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC200X300S
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×300 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC200X300S Is Used
Automotive Press Stamping
Provides the robust 15708 N thrust required to actuate heavy-duty stamping and holding fixtures in automotive body panel production lines.
Pallet Load Squaring
Deploys a 300 mm stroke to square and align heavy inbound pallets on high-speed distribution conveyors before stretch wrapping.
Injection Mold Ejection
Exerts consistent pulling force via the M36x2.0 rod thread to extract large molded plastic components from heavy industrial tooling.
Is the Airtac SGC Standard Cylinder SGC200X300S the Right Cylinder?
When sizing this 200 mm bore, compare it against its neighbors: a 160 mm bore yields 10053 N of push at 0.5 MPa, while stepping up to the 250 mm bore provides 24543 N. If your application loses air or the valve centers, be aware the piston will drift, as the adjustable air cushion only decelerates the rod near stroke end rather than locking it. To hold a load securely, install an external rod lock or a pilot-operated check valve. With a 300 mm stroke, ensure adequate guide support to prevent rod bending under heavy side loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC200X300S FAQ
This 200 mm bore cylinder features a G3/4 air port and delivers 15708 N push / 15079 N pull at 0.5 MPa, 21991 N push / 21110 N pull at 0.7 MPa, with a theoretical maximum of 3204 kgf at 1.0 MPa.
Yes, it is dimensionally interchangeable per the ISO 15552 mounting interface, allowing you to use standard large-bore accessories. The included -S magnet enables CMSG, DMSG, and EMSG switches for position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC200X300S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.