Airtac SGC Standard Cylinder SGC200X330
The AirTAC Airtac SGC Standard Cylinder SGC200X330 is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 330mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke330 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC200X330
Delivering 15708 N of push force at 0.5 MPa, this double-acting tie-rod cylinder is built for heavy-duty automation. The Ø200 mm bore uses a G3/4 air port and an M36x2.0 piston rod. Four steel tie rods clamp the aluminum barrel to the covers for high rigidity, while the two-way piston seal maintains an internal oil reservoir for long service life. It is dimensionally interchangeable per the ISO 15552 mounting interface, dropping easily into existing large-bore fixtures.
For practical sizing, plan for about 9425 N of real work at 0.5 MPa, which safely lifts roughly 801 kg vertically with a 2:1 margin. This non-magnet SKU cannot host CMSG, DMSG, or EMSG sensors; add the -S variant if you require position detection. The standard TPU seal handles -20 to +70 C, with a Viton H option available for 0-150 C environments.
Airtac SGC Standard Cylinder SGC200X330 Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC200X330 |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 330 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC200X330
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×330 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC200X330 Is Used
Stamping Press Feed
Pushes heavy coil stock into a mechanical press with 15708 N at 0.5 MPa, using the 330 mm stroke to clear the die area during retraction.
Pallet Stopper Gate
Acts as a robust stop gate on a heavy-duty accumulation conveyor, absorbing impact via the 50 mm adjustable air cushions at both ends.
Injection Mold Clamp
Provides auxiliary clamping force on large injection molds, relying on the rigid four tie-rod construction to maintain alignment under high stress.
Is the Airtac SGC Standard Cylinder SGC200X330 the Right Cylinder?
When sizing this 330 mm stroke model, compare it against its neighbors: the smaller Ø160 bore yields 10053 N push at 0.5 MPa, while the larger Ø250 provides 24543 N. If your fixture requires holding a load vertically during air loss or valve centering, note that a plain cylinder will drift; the adjustable air cushion only decelerates the piston near stroke end and acts as no brake. You must fit an external rod lock or pilot-operated check valve for secure load holding. Furthermore, at 330 mm of travel, guide the load externally to prevent rod bending and side-load wear.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC200X330 FAQ
The Ø200 mm bore features a G3/4 air port and an M36x2.0 rod thread. It delivers 15708 N push and 15079 N pull at 0.5 MPa, 21991 N push and 21110 N pull at 0.7 MPa, with a theoretical maximum of 3204 kgf at 1.0 MPa.
No, this specific SKU lacks the internal magnet and cannot host CMSG, DMSG, or EMSG switches. You must select the SGC200X330-S variant to enable magnetic position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC200X330
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.