Airtac SGC Standard Cylinder SGC200X335
The AirTAC Airtac SGC Standard Cylinder SGC200X335 is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 335mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke335 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC200X335
Delivering 15708 N of push force at 0.5 MPa, this large-bore double-acting cylinder handles heavy industrial loads with ease. Because it is dimensionally interchangeable per the ISO 15552 mounting interface, it drops directly into existing large-bore fixtures without custom bracketry. The robust tie-rod construction uses four steel rods to clamp the aluminum barrel to the covers, ensuring high rigidity under stress, while a two-way piston seal maintains an internal oil reservoir for long service life.
For practical sizing, plan for about 9425 N of real work at 0.5 MPa, which safely lifts roughly 801 kg vertically with a 2:1 margin. This SKU lacks the -S magnet, meaning it cannot accept CMSG, DMSG, or EMSG position sensors. It features a G3/4 air port, an M36x2.0 rod thread, and adjustable 50 mm air cushions at both ends to decelerate the piston smoothly.
Airtac SGC Standard Cylinder SGC200X335 Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC200X335 |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 335 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC200X335
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×335 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC200X335 Is Used
Press Fit Assembly
Drives heavy-duty bearings into automotive transmission housings, utilizing the 21991 N push force at 0.7 MPa to seat components reliably.
Pallet Depalletizer
Lifts loaded pallets via the 335 mm stroke, handling the 801 kg safe vertical lift capacity to transfer goods between conveyor tiers.
Injection Mold Clamping
Secures large industrial molds using the rigid four-rod tie-rod construction, maintaining alignment under high clamping forces.
Is the Airtac SGC Standard Cylinder SGC200X335 the Right Cylinder?
When sizing this 200 mm bore, stepping down to the 160 mm bore drops the 0.5 MPa push force to 10053 N, whereas stepping up to the 250 mm bore increases it to 24543 N. Choose this 335 mm stroke model when that specific travel distance is required. Remember that a plain cylinder drifts if air pressure is lost or the valve is centered; the air cushion only decelerates the piston near stroke end and does not act as a lock. For suspended or vertical loads that must be held in place during an air failure, integrate an external rod lock or a pilot-operated check valve. Since this specific SKU lacks the -S magnet, you must select an -S variant if your application requires magnetic position sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC200X335 FAQ
The SGC200X335 delivers a push force of 15708 N and a pull force of 15079 N at 0.5 MPa. At 0.7 MPa, the push is 21991 N and the pull is 21110 N. The theoretical maximum force is 3204 kgf at 1.0 MPa. It uses a G3/4 air port and an M36x2.0 piston rod thread.
No, this specific SKU does not include the -S magnet, so it cannot accommodate CMSG, DMSG, or EMSG magnetic switches. You would need to specify the -S variant for position sensing. The cylinder is dimensionally interchangeable per the ISO 15552 mounting interface and uses a rigid tie-rod build.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC200X335
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.