Airtac SGC Standard Cylinder SGC200X350CA
The AirTAC Airtac SGC Standard Cylinder SGC200X350CA is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 350mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke350 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC200X350CA
Delivering 15708 N of push force at 0.5 MPa, this double-acting tie-rod cylinder is built for heavy-duty automation. The Ø200 mm bore operates at speeds of 30-500 mm/s, utilizing a G3/4 air port and an M36x2.0 piston rod thread. Four steel tie rods clamp the aluminum barrel to the covers, providing the high rigidity needed to handle large-bore thrust without flexing. A heterogeneous two-way piston seal maintains an internal oil reservoir for long operational life.
Because it follows the ISO 15552 mounting interface, this unit drops directly into existing large-bore fixtures and shares standard accessory dimensions. Plan for about 9425 N of real work at 0.5 MPa, or roughly 801 kg lifted vertically with a 2:1 safety margin. The standard TPU seal handles temperatures from -20 to +70 C, while a Viton H option extends this to 0-150 C. Note that this specific SKU lacks the -S magnet, meaning it cannot accept CMSG, DMSG, or EMSG position switches without upgrading to a magnetized variant.
Airtac SGC Standard Cylinder SGC200X350CA Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC200X350CA |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC200X350CA
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC200X350CA Is Used
Automotive Press Die Handling
Lifts and positions heavy stamping dies using the 15708 N push force, relying on the rigid tie-rod construction to maintain alignment under high off-center loads.
Large Injection Mold Clamping
Provides the robust actuation needed to secure heavy mold halves, utilizing the 350 mm stroke to clear the tooling area before part extraction.
Palletizer Actuation
Drives heavy pallet lifting arms in high-throughput packaging lines, where the 9425 N safe working load easily manages substantial unit weights.
Is the Airtac SGC Standard Cylinder SGC200X350CA the Right Cylinder?
When sizing this 350 mm stroke model, consider the neighboring SGC bores: the Ø160 mm drops to 10053 N push at 0.5 MPa, while the Ø250 mm jumps significantly to 24543 N. If your application requires position feedback, you must select an SGC200X350CA-S variant instead, as this base SKU has no magnet for CMSG/DMSG/EMSG sensors. The included CA clevis mounting follows standard ISO 15552 dimensions, allowing easy integration with your existing pivoting fixtures.
For a 350 mm stroke, carefully manage side loads to prevent rod bending and premature seal wear; external guide rails are recommended if the load is not perfectly axial. Furthermore, a plain cylinder drifts when air is lost or the valve is centered—the adjustable air cushion only decelerates the piston near the end of stroke and does not function as a locking brake. To suspend a load safely during an air failure, install an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC200X350CA FAQ
This Ø200 mm bore cylinder features a G3/4 air port and an M36x2.0 rod thread. It generates 15708 N push and 15079 N pull at 0.5 MPa, 21991 N push and 21110 N pull at 0.7 MPa, with a theoretical maximum force of 3204 kgf at 1.0 MPa.
No, this specific SKU does not include the -S magnet, so it cannot accept CMSG, DMSG, or EMSG switches. You would need the SGC200X350CA-S variant for sensing. It uses a standard ISO 15552 mounting interface, ensuring compatibility with standard CA clevis accessories.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC200X350CA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.