Airtac SGC Standard Cylinder SGC200X360
The AirTAC Airtac SGC Standard Cylinder SGC200X360 is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 360mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke360 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC200X360
Delivering 15708 N of push force at 0.5 MPa, this double-acting tie-rod cylinder is built for heavy-duty automation. The Ø200 mm bore utilizes four steel tie rods to clamp the aluminum barrel to the covers, ensuring high structural rigidity under large-bore thrust loads. A two-way piston seal maintains an internal oil reservoir for continuous lubrication and extended service life. The unit features a G3/4 air port and an M36x2.0 piston rod thread.
Because it follows the ISO 15552 mounting interface, this model drops directly into existing large-bore fixtures and shares standardized accessory dimensions. For practical sizing, plan for about 9425 N of real work at 0.5 MPa, which safely lifts roughly 801 kg vertically with a 2:1 margin. Note that this specific SKU lacks the -S magnet, so it cannot host CMSG, DMSG, or EMSG position switches without changing the variant.
Airtac SGC Standard Cylinder SGC200X360 Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC200X360 |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 360 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC200X360
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×360 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC200X360 Is Used
Automotive Press Loading
Pushes heavy stamping blanks into forming dies using 15708 N of thrust at 0.5 MPa, relying on the rigid tie-rod frame to resist deflection.
Pallet Dispenser Ejection
Deploys the 360 mm stroke to separate and feed empty pallets from a magazine stack, moving loads safely within the 9425 N working limit.
Injection Mold Clamping
Provides steady holding pressure for large resin molds, utilizing the ISO 15552 mounting interface for easy integration into existing platens.
Is the Airtac SGC Standard Cylinder SGC200X360 the Right Cylinder?
When sizing this 200 mm bore unit, compare its 15708 N push force at 0.5 MPa against the smaller Ø160 bore (10053 N) or the larger Ø250 bore (24543 N) to match your exact requirement. If your application requires position sensing, you must select the -S magnet version, as this base SKU cannot accept a reed or solid-state switch. For the 360 mm stroke, ensure adequate guide support to prevent rod bending and side-load wear.
Remember that a standard pneumatic cylinder drifts when air is lost or the valve is centered; the adjustable 50 mm air cushions at both ends only decelerate the piston near stroke end and do not function as a locking brake. To suspend a vertical load safely, install an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC200X360 FAQ
This Ø200 mm bore cylinder features a G3/4 air port and an M36x2.0 rod thread. It generates 15708 N push and 15079 N pull at 0.5 MPa, 21991 N push and 21110 N pull at 0.7 MPa, with a theoretical maximum force of 3204 kgf at 1.0 MPa.
No, this specific SKU does not include a magnet. You must purchase the -S variant to use CMSG, DMSG, or EMSG switches. The four steel tie rods provide structural rigidity, but the standard air cushions only decelerate the piston and will not hold a load in place without an external rod lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC200X360
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.