Airtac SGC Standard Cylinder SGC200X40S
The AirTAC Airtac SGC Standard Cylinder SGC200X40S is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 40mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke40 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC200X40S
Delivering 15708 N of push force at 0.5 MPa, this double-acting large-bore cylinder handles heavy industrial tasks with ease. The SGC200X40S features a robust tie-rod construction where four steel rods clamp the aluminum barrel to the covers, ensuring high rigidity under stress. A two-way piston seal maintains an internal oil reservoir for long operational life, while the G3/4 port facilitates high airflow. Because this SKU includes the -S magnet, it directly supports CMSG, DMSG, and EMSG position switches.
Thanks to its standardized ISO 15552 mounting interface, the unit drops seamlessly into existing large-bore fixtures without custom bracketry. For practical sizing, plan for about 9425 N of real work at 0.5 MPa, which translates to lifting roughly 801 kg vertically with a 2:1 safety margin. The 40 mm stroke moves quickly, and adjustable air cushions at both ends decelerate the piston smoothly near the end caps.
Airtac SGC Standard Cylinder SGC200X40S Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC200X40S |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 40 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC200X40S
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×40 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC200X40S Is Used
Stamping Press Feed
Provides the robust 15708 N push force required to clamp heavy steel blanks in automated stamping lines.
Pallet Squaring Gate
Uses the short 40 mm stroke and built-in magnet to rapidly square heavy pallets before stretch wrapping.
Injection Mold Lock
Applies high clamping pressure to secure large injection molding tooling halves during machine setup.
Is the Airtac SGC Standard Cylinder SGC200X40S the Right Cylinder?
When sizing this 200 mm bore model, compare your real load against the 15708 N push rating at 0.5 MPa. If you need less force, the neighboring 160 mm bore provides 10053 N; if your application demands more power, stepping up to the 250 mm bore yields 24543 N. Because this specific SKU carries the -S suffix, you can mount CMSG, DMSG, or EMSG sensors directly for end-of-stroke confirmation. The 40 mm stroke is highly compact, minimizing side-load risks, but always ensure rigid mounting using the available LB, FA, or TC hardware.
Remember that a standard double-acting cylinder like this will drift if air pressure is lost or the control valve is centered. The adjustable air cushion only slows the piston near the stroke ends and does not function as a braking device. If your machinery requires strict load holding on air loss, you must integrate an external pilot-operated check valve or a dedicated rod lock.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC200X40S FAQ
This 200 mm bore cylinder features a G3/4 air port and an M36x2.0 rod thread. It delivers 15708 N push and 15079 N pull at 0.5 MPa, 21991 N push and 21110 N pull at 0.7 MPa, with a theoretical maximum force of 3204 kgf at 1.0 MPa.
Yes, it is dimensionally interchangeable per the ISO 15552 mounting interface, allowing you to use standard large-bore accessories. Additionally, the -S suffix indicates a built-in piston magnet, enabling the use of CMSG, DMSG, or EMSG reed and electronic switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC200X40S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.