Airtac SGC Standard Cylinder SGC200X430S
The AirTAC Airtac SGC Standard Cylinder SGC200X430S is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 430mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke430 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC200X430S
Delivering 15708 N of push force at 0.5 MPa, this double-acting large-bore ISO 15552 tie-rod cylinder handles heavy industrial loads with ease. Four steel tie rods clamp the aluminum barrel to the covers for high structural rigidity, while the two-way piston seal maintains an internal oil reservoir for long mechanical life. Plan for about 9425 N of real work at 0.5 MPa, or roughly 801 kg lifted vertically with a 2:1 margin.
The built-in piston magnet (-S) directly supports CMSG, DMSG, and EMSG switches for precise end-of-stroke detection. It uses a G3/4 air port, an M36x2.0 rod-end thread, and adjustable 50 mm air cushions at both ends to decelerate the payload smoothly. The default TPU seal operates from -20 to +70 C, with a Viton H option available for environments up to 150 C.
Airtac SGC Standard Cylinder SGC200X430S Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC200X430S |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 430 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC200X430S
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×430 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC200X430S Is Used
Automotive Press Stamping
Drives heavy lower dies into position within a stamping press, utilizing the 15708 N push force to shift 800 kg tooling assemblies securely.
Palletizer Head Actuator
Extends 430 mm to lower heavy unitized pallet loads onto stretch wrappers, relying on the adjustable 50 mm air cushions to prevent harsh end impacts.
Injection Mold Clamping
Provides steady clamping pressure on large resin molds, using the CMSG sensors enabled by the -S magnet to confirm full extension before resin injection.
Is the Airtac SGC Standard Cylinder SGC200X430S the Right Cylinder?
This 200 mm bore sits between the SGC160 (10053 N push @0.5 MPa) and the SGC250 (24543 N push @0.5 MPa), giving you a clear upgrade path if your pressure requirements shift. The 430 mm stroke exceeds the 400 mm threshold, so you must account for side loads and use external guide rails to prevent rod bending over the extended length.
Because the standard SGC design is double-acting, it will drift and cannot hold a vertical load if air pressure drops or the valve is centered—the end cushions only decelerate the piston near stroke end, acting neither as a lock nor a brake. For suspended loads, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC200X430S FAQ
The SGC200X430S delivers a push force of 15708 N and a pull force of 15079 N at 0.5 MPa. At 0.7 MPa, push is 21991 N and pull is 21110 N. The theoretical maximum force is 3204 kgf at 1.0 MPa. It features a G3/4 air port and an M36x2.0 rod-end thread.
Yes, the SGC series is dimensionally interchangeable per the ISO 15552 mounting interface, meaning it drops into the same large-bore fixtures and accessory mounting points. Its tie-rod construction—where four steel rods clamp the barrel to the covers—ensures high rigidity under heavy loads without requiring a specific brand's footprint.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC200X430S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.