Airtac SGC Standard Cylinder SGC200X470
The AirTAC Airtac SGC Standard Cylinder SGC200X470 is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 470mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke470 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC200X470
Delivering 15708 N of push force at 0.5 MPa, this double-acting large-bore cylinder brings serious power to automated lines. The Ø200 mm bore operates on a G3/4 port, while the 470 mm stroke moves substantial loads at speeds of 30-500 mm/s. It uses a TPU seal as standard, with Viton H available for 0-150 C high-temperature environments.
Four steel tie rods clamp the aluminum barrel to the covers, providing the high rigidity needed to handle large-bore thrust without flexing. The standardized ISO 15552 mounting interface means it drops directly into existing large-bore fixtures. For practical sizing, plan for about 9425 N of real work at 0.5 MPa, which safely lifts roughly 801 kg vertically with a 2:1 margin.
Airtac SGC Standard Cylinder SGC200X470 Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC200X470 |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 470 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC200X470
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×470 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC200X470 Is Used
Heavy Press Demolding
Provides the 15708 N push at 0.5 MPa required to break large rubber or composite molds free in automotive part forming.
Pallet Clamp Arm
Utilizes the 470 mm stroke to reach and clamp oversized pallets securely in place during automated stretch-wrapping cycles.
Stamping Ejector
Ejects heavy metal stampings from progressive dies, using the M36x2.0 rod thread to attach custom tooling securely.
Is the Airtac SGC Standard Cylinder SGC200X470 the Right Cylinder?
When sizing this 470 mm stroke model, compare it against its neighbors: the Ø160 bore yields 10053 N push at 0.5 MPa, while the Ø250 bore provides 24543 N, giving you clear steps for scaling force. Because this SKU lacks the -S magnet, it cannot accept CMSG, DMSG, or EMSG position switches; choose the -S variant if you require electronic sensing. For any application needing the piston to stay put after air loss or valve centering, note that the standard air cushion only decelerates the stroke end and does not act as a lock. You must add an external rod lock or a pilot-operated check valve to hold a suspended load securely.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC200X470 FAQ
The SGC200X470 has a G3/4 port and generates 15708 N push / 15079 N pull at 0.5 MPa, 21991 N push / 21110 N pull at 0.7 MPa, and a theoretical maximum of 3204 kgf at 1.0 MPa.
It is dimensionally interchangeable per the ISO 15552 (orig. ISO 6431) mounting interface, but this specific SKU lacks the -S magnet, so it cannot accept CMSG, DMSG, or EMSG switches. You must select an -S variant for sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC200X470
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.