Airtac SGC Standard Cylinder SGC200X600TC
The AirTAC Airtac SGC Standard Cylinder SGC200X600TC is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 600mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke600 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC200X600TC
Generating 15708 N of push force at 0.5 MPa, this double-acting large-bore actuator handles heavy industrial loads across its 600 mm travel. The Ø200 mm bore features a G3/4 air port, an M36x2.0 piston rod, and 50 mm adjustable air cushions at both ends to decelerate massive moving masses smoothly. Four steel tie rods clamp the aluminum barrel to the covers, ensuring high structural rigidity under high thrust, while the two-way piston seal maintains an internal oil reservoir for long mechanical life.
Because it follows the standardized ISO 15552 mounting interface, this TC trunnion model drops directly into existing large-bore fixture layouts. For practical sizing, plan for about 9425 N of real work at 0.5 MPa, which equates to lifting roughly 801 kg vertically with a 2:1 safety margin. Note that this specific SKU lacks the -S magnet, so it cannot accept CMSG, DMSG, or EMSG magnetic switches; order an -S variant if position sensing is required.
Airtac SGC Standard Cylinder SGC200X600TC Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC200X600TC |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC200X600TC
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC200X600TC Is Used
Automotive Press Transfer
Moves heavy stamped body panels across a 600 mm gap, utilizing the 15708 N push force to reliably shift heavy dies and fixtures between press stations.
Pallet Dispenser Pusher
Actuates a 600 mm stroke to index empty wooden pallets into a high-speed packaging line, with the TC trunnion mount absorbing angular misalignment during the push.
Heavy Mold Extraction
Ejects dense rubber or composite molds from heated presses, where the 50 mm adjustable air cushions absorb the substantial kinetic energy at the end of the 600 mm extension.
Is the Airtac SGC Standard Cylinder SGC200X600TC the Right Cylinder?
This 200 mm bore sits between the SGC160 (10053 N push @0.5 MPa) and the SGC250 (24543 N push @0.5 MPa), giving you a clear upgrade path if the 160 mm under-delivers or the 250 mm is physically too large. The TC trunnion mount accommodates pivoting articulation along the cylinder axis. Because this is a 600 mm stroke, you must account for rod-bending and side loads—provide external guide rails to support the tooling and prevent premature seal wear.
Remember that a standard double-acting cylinder drifts when air is removed or the valve is centered; the end cushions only decelerate the piston near stroke end and do not act as a brake. If the application requires holding a vertical load during an air loss event, install an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC200X600TC FAQ
This Ø200 mm bore model uses a G3/4 air port and an M36x2.0 piston rod. It generates 15708 N push and 15079 N pull at 0.5 MPa, 21991 N push and 21110 N pull at 0.7 MPa, with a theoretical maximum force of 3204 kgf at 1.0 MPa.
This specific SKU does not include a magnet (-S), so it cannot accept CMSG, DMSG, or EMSG switches. Structurally, the ISO 15552 mounting interface ensures dimensional interchangeability with standard large-bore fixtures and accessories, and the rigid tie-rod build handles high thrust without barrel flex.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC200X600TC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.