Airtac SGC Standard Cylinder SGC200X650S
The AirTAC Airtac SGC Standard Cylinder SGC200X650S is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 650mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke650 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC200X650S
Delivering 15708 N of push force at 0.5 MPa, this large-bore double-acting cylinder tackles heavy automation tasks with ease. The SGC200X650S features a robust tie-rod design where four steel rods clamp the aluminium barrel to the covers, while a two-way piston seal maintains an internal oil reservoir for extended operational life. Plan for about 9425 N of real work at 0.5 MPa, which safely lifts roughly 801 kg vertically with a 2:1 margin.
Because this 650 mm stroke variant includes the -S magnet, it readily accepts CMSG, DMSG, or EMSG switches for position sensing. The G3/4 air port and M36x2.0 rod thread handle high flow rates, and the standardized ISO 15552 mounting interface ensures it drops directly into existing large-bore fixtures without custom brackets.
Airtac SGC Standard Cylinder SGC200X650S Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC200X650S |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 650 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC200X650S
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×650 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC200X650S Is Used
Automotive Press Loading
Pushes heavy stamping blanks into hydraulic presses using 15708 N of thrust at 0.5 MPa, relying on the 650 mm stroke to clear the tooling area completely.
Pallet Dispenser Ejection
Extracts empty pallets from vertical magazine stacks, using the built-in magnet and DMSG sensors to confirm full 650 mm retraction before the conveyor advances.
Heavy Mold Separation
Breaks loose large industrial molds by generating 21991 N of push force at 0.7 MPa, with the tie-rod construction maintaining rigidity under sudden high-impact loads.
Is the Airtac SGC Standard Cylinder SGC200X650S the Right Cylinder?
When sizing this 200 mm bore unit, compare your actual load against its neighbours: the smaller 160 mm bore provides 10053 N of push at 0.5 MPa, while the larger 250 mm bore offers 24543 N. If your system loses air or the valve centres, the piston will drift; the adjustable air cushion only decelerates the stroke near the end and cannot act as a brake, so fit an external rod lock or pilot-operated check valve for suspended loads. For a 650 mm stroke, always use external guides to prevent rod bending and side-load damage under heavy thrust.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC200X650S FAQ
This 200 mm bore cylinder features a G3/4 air port and delivers 15708 N push / 15079 N pull at 0.5 MPa, 21991 N push / 21110 N pull at 0.7 MPa, with a theoretical maximum of 3204 kgf at 1.0 MPa.
Yes, it is dimensionally interchangeable per the ISO 15552 mounting interface, so standard foot, flange, and trunnion brackets fit perfectly. The -S suffix means it has an internal magnet for CMSG, DMSG, or EMSG position switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC200X650S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.