Airtac SGC Standard Cylinder SGC200X650SH
The AirTAC Airtac SGC Standard Cylinder SGC200X650SH is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 650mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke650 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC200X650SH
Delivering 15708 N of push force at 0.5 MPa, this large-bore actuator handles heavy-duty automation with ease. It features a genuine ISO 15552 mounting interface, ensuring dimensional interchangeability for existing large-bore fixtures. Four steel tie rods clamp the aluminum barrel to the covers for high structural rigidity, while the two-way piston seal maintains an internal oil reservoir for long service life. Equipped with a G3/4 port and a 50 mm adjustable air cushion at both ends, it also includes a built-in piston magnet for position sensing.
Because of the generous 650 mm stroke, plan for external guide support to prevent rod bending under heavy side loads. For real-world sizing, expect about 9425 N of usable work at 0.5 MPa, which safely lifts an 801 kg vertical load with a 2:1 margin. The Viton H seal option allows operation in environments up to 150 C, and the CMSG, DMSG, or EMSG switches track piston position precisely.
Airtac SGC Standard Cylinder SGC200X650SH Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC200X650SH |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 650 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC200X650SH
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×650 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC200X650SH Is Used
Automotive Press Transfer
Moves heavy stamped panels between die stations using the 21991 N push force available at 0.7 MPa, withstanding high ambient heat via Viton seals.
Heavy Metal Stamping
Provides the robust 650 mm stroke and high thrust needed to feed thick steel blanks into large mechanical presses while maintaining ISO 15552 mounting compatibility.
Industrial Waste Compaction
Compresses dense scrap materials in hot manufacturing environments, relying on the tie-rod construction to handle sustained 15708 N loads at 0.5 MPa.
Is the Airtac SGC Standard Cylinder SGC200X650SH the Right Cylinder?
When sizing this 200 mm bore unit, compare your actual load against its 15708 N push force at 0.5 MPa. If your application requires less power, the smaller 160 mm bore provides 10053 N; if you need more thrust, the 250 mm bore offers 24543 N. This specific SKU includes the -S magnet for CMSG, DMSG, or EMSG sensors, and the -H Viton seal for high-temperature environments up to 150 C.
Remember that a standard double-acting cylinder drifts when air pressure is lost or the valve is centered, as the air cushion only decelerates the piston near stroke end and acts as no lock. For suspended or vertical loads, install an external rod lock or a pilot-operated check valve. Additionally, the 650 mm stroke demands rigid external guiding to absorb side loads and prevent rod bending.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC200X650SH FAQ
This 200 mm bore cylinder features a G3/4 air port and a 40 mm piston rod. It delivers 15708 N push and 15079 N pull at 0.5 MPa, 21991 N push and 21110 N pull at 0.7 MPa, with a theoretical maximum force of 3204 kgf at 1.0 MPa.
No, the double-acting piston drifts when air is lost or the valve is centered, as the 50 mm adjustable air cushion only decelerates the piston near stroke end. You must use an external rod lock or pilot-operated check valve to hold suspended loads safely.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC200X650SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.