Airtac SGC Standard Cylinder SGC200X700
The AirTAC Airtac SGC Standard Cylinder SGC200X700 is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 700mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke700 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC200X700
Delivering 15708 N of push force at 0.5 MPa, this large-bore actuator handles heavy-duty automation tasks. As a genuine ISO 15552 tie-rod cylinder, it drops seamlessly into existing large-bore fixtures via standardized mounting interface dimensions. Four steel tie rods clamp the aluminium barrel to the covers, providing high rigidity under massive thrust, while the two-way piston seal maintains an internal oil reservoir for long service life. The unit operates at 30-500 mm/s and features a G3/4 air port.
Because this specific SKU lacks the -S magnet suffix, it cannot accept CMSG, DMSG, or EMSG position switches. For real-world sizing, plan for about 9425 N of actual work at 0.5 MPa, which safely lifts roughly 801 kg vertically with a 2:1 margin. The default TPU seal handles -20 to +70 C, with a Viton H option available for 0-150 C environments.
Airtac SGC Standard Cylinder SGC200X700 Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC200X700 |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC200X700
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC200X700 Is Used
Automotive Press Loading
Moves heavy stamping blanks into hydraulic presses, utilizing the 15708 N push force to position large steel sheets reliably.
Pallet Dispenser Mechanism
Ejects empty pallets from vertical magazines in high-throughput distribution centers using the 700 mm stroke and 801 kg safe lifting capacity.
Injection Mold Extraction
Reaches deep into large molding machines to extract bulky plastic automotive components, relying on the rigid four-tie-rod construction.
Is the Airtac SGC Standard Cylinder SGC200X700 the Right Cylinder?
When sizing this 200 mm bore actuator, compare it against its neighbours: the 160 mm bore yields 10053 N of push at 0.5 MPa, while the larger 250 mm bore provides 24543 N. If your application requires position feedback, select the -S magnet variant instead, as this base model cannot mount sensors. Because the 700 mm stroke is substantial, ensure adequate external guide support to prevent rod bending and side-load damage during extension. Note that a standard cylinder drifts when air is lost or a valve is centered; the air cushion only decelerates the piston near stroke end. For suspended or vertical loads, install an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC200X700 FAQ
The SGC200X700 delivers 15708 N push and 15079 N pull at 0.5 MPa, 21991 N push and 21110 N pull at 0.7 MPa, with a theoretical maximum of 3204 kgf at 1.0 MPa. It features a G3/4 air port and a 50 mm adjustable air cushion at both ends.
This specific SKU lacks the -S magnet, so it cannot accept CMSG, DMSG, or EMSG switches. It is dimensionally interchangeable per the ISO 15552 mounting interface, allowing it to use standard large-bore ISO 15552 fixtures and accessories like FA flange or TC trunnion mounts.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC200X700
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.