Airtac SGC Standard Cylinder SGC200X80
The AirTAC Airtac SGC Standard Cylinder SGC200X80 is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 80mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke80 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC200X80
Delivering 15708 N of push force at 0.5 MPa, this double-acting AirTAC large-bore cylinder tackles heavy industrial tasks. Its four steel tie rods clamp the aluminum barrel to the covers for high rigidity, while the two-way piston seal maintains an internal oil reservoir to maximize service life. Dimensionally interchangeable per the ISO 15552 mounting interface, it drops directly into existing large-bore fixtures. It features a 40 mm rod, a G3/4 port, and 50 mm adjustable air cushions at both ends.
Because this SKU lacks the -S magnet, it cannot accept CMSG, DMSG, or EMSG position switches. For real-world sizing, plan for about 9425 N of actual work at 0.5 MPa, which equates to lifting roughly 801 kg vertically with a 2:1 safety margin. The standard TPU seal handles -20 to +70 C, though a Viton H option extends this to 150 C.
Airtac SGC Standard Cylinder SGC200X80 Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC200X80 |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC200X80
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC200X80 Is Used
Press Die Ejection
Ejects heavy formed parts from stamping presses using the 15708 N push force, relying on the rigid tie-rod frame to absorb sudden impact.
Injection Mold Clamping
Provides auxiliary holding pressure for large injection molds, utilizing the 80 mm stroke for rapid open and close cycles.
Pallet Stopper Gate
Acts as a heavy-duty stopper gate on high-mass conveyor lines, halting loaded pallets using the 9425 N safe working capacity.
Is the Airtac SGC Standard Cylinder SGC200X80 the Right Cylinder?
If 15708 N at 0.5 MPa is excessive, the smaller SGC160 bore provides 10053 N; stepping up to the SGC250 yields 24543 N. This 80 mm stroke operates well within the 30-500 mm/s speed range. Since this specific model has no -S suffix, it cannot support magnetic sensors. Note that the air cushions only decelerate the piston near stroke end; they do not function as a brake. If the machinery loses air, the piston will drift, so fit an external rod lock or pilot-operated check valve for suspended loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC200X80 FAQ
The SGC200X80 delivers 15708 N push and 15079 N pull at 0.5 MPa, 21991 N push and 21110 N pull at 0.7 MPa, with a theoretical maximum of 3204 kgf at 1.0 MPa. It uses a G3/4 air port and a 40 mm piston rod.
No, this specific SKU does not include a magnet. You must purchase the -S variant to use CMSG, DMSG, or EMSG switches. The ISO 15552 mounting interface ensures it matches standard large-bore fixtures.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC200X80
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.