Airtac SGC Standard Cylinder SGC200X800FA
The AirTAC Airtac SGC Standard Cylinder SGC200X800FA is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 800mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke800 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC200X800FA
Delivering 15708 N of push force at 0.5 MPa, this double-acting large-bore ISO 15552 tie-rod cylinder is built for heavy-duty automation. Four steel tie rods clamp the aluminum barrel to the covers for high rigidity, while the two-way piston seal maintains an internal oil reservoir for long service life. Plan for about 9425 N of real work at 0.5 MPa, which lifts roughly 801 kg vertically with a 2:1 safety margin.
This 200 mm bore unit features a G3/4 port, an M36x2.0 rod thread, and 50 mm adjustable air cushions at both ends. Because this SKU lacks the -S magnet, it cannot accept CMSG, DMSG, or EMSG position switches. The FA front flange mount utilizes the standardized ISO 15552 mounting interface, ensuring dimensional interchangeability for fixture spares.
Airtac SGC Standard Cylinder SGC200X800FA Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC200X800FA |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC200X800FA
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC200X800FA Is Used
Automotive Press Feed
Pushes heavy stamping blanks into a large press using its 15708 N thrust at 0.5 MPa over the 800 mm stroke.
Pallet Transfer Stopper
Acts as a robust 800 mm stroke end-stop for heavy industrial pallets on a high-throughput assembly line.
Lift Gate Actuation
Raises and lowers loaded material lift gates, safely moving components weighing up to 800 kg with a 2:1 margin.
Is the Airtac SGC Standard Cylinder SGC200X800FA the Right Cylinder?
When sizing this 800 mm stroke model, consider the neighboring SGC bores: the 160 mm bore yields 10053 N push at 0.5 MPa, while the 250 mm bore provides 24543 N. Because this is a long 800 mm stroke, you must use external guides to prevent rod bending and absorb side loads. Note that a plain cylinder drifts when air is lost or the valve is centered; the air cushion only decelerates the piston near stroke end. For a held load, install an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC200X800FA FAQ
At 0.5 MPa it provides 15708 N push and 15079 N pull. At 0.7 MPa it yields 21991 N push and 21110 N pull. The theoretical maximum force is 3204 kgf at 1.0 MPa. This 200 mm bore cylinder uses a G3/4 air port.
No, this specific SKU does not include the -S magnet, so it cannot accept CMSG, DMSG, or EMSG magnetic switches. You would need the -S variant for sensing. It uses an FA front flange mount conforming to the ISO 15552 mounting interface.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC200X800FA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.