Airtac SGC Standard Cylinder SGC200X850
The AirTAC Airtac SGC Standard Cylinder SGC200X850 is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 850mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke850 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC200X850
Delivering 15708 N of push force at 0.5 MPa, this double-acting ISO 15552 tie-rod cylinder handles heavy-duty automation with ease. Four steel tie rods clamp the aluminum barrel to the covers for high rigidity, while the two-way piston seal maintains an internal oil reservoir for long service life. Plan for about 9425 N of real work, or roughly 801 kg lifted vertically with a 2:1 margin.
It features a 200 mm bore, a 40 mm rod, and a G3/4 air port. Because this SKU lacks the -S magnet, it cannot accept CMSG, DMSG, or EMSG position switches. The standard TPU seal supports temperatures from -20 to +70 C, with a Viton H option available for 0-150 C environments.
Airtac SGC Standard Cylinder SGC200X850 Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC200X850 |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 850 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC200X850
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×850 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC200X850 Is Used
Automotive Press Loading
Pushes heavy stamping blanks into large mechanical presses using its 15708 N thrust at 0.5 MPa, with the 850 mm stroke covering the full feed distance.
Pallet Dispenser Pusher
Separates empty pallets from a magazine stack, relying on the rigid tie-rod construction to handle repetitive high-force lateral pushing without flexing.
Heavy Waste Compaction
Compresses industrial scrap materials in large hoppers, utilizing the adjustable 50 mm air cushions at both ends to decelerate the massive payload smoothly.
Is the Airtac SGC Standard Cylinder SGC200X850 the Right Cylinder?
When sizing this 200 mm bore unit, note the smaller 160 mm option yields 10053 N of push at 0.5 MPa, whereas the larger 250 mm version provides 24543 N. If your mechanism requires position feedback, select the -S magnet variant instead of this base model to enable CMSG, DMSG, or EMSG sensors. Utilize LB foot, FA flange, or TC trunnion mounts per the ISO 15552 interface.
At an 850 mm stroke, the 40 mm rod is highly susceptible to bending under side loads. Always use an external guide or stopper to prevent rod damage and premature seal wear. Furthermore, this cylinder will drift if air pressure is lost or the valve is centered; the air cushions only decelerate the piston near the end of stroke and do not function as a brake. Install an external rod lock or pilot-operated check valve for suspended loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC200X850 FAQ
This 200 mm bore cylinder features a G3/4 air port and a 40 mm piston rod. It generates 15708 N push and 15079 N pull at 0.5 MPa, 21991 N push and 21110 N pull at 0.7 MPa, with a theoretical maximum force of 3204 kgf at 1.0 MPa.
No, this specific SKU does not include a magnet. You must select the SGC200X850-S variant to use CMSG, DMSG, or EMSG magnetic switches. The ISO 15552 mounting interface ensures it drops directly into existing large-bore fixtures.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC200X850
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.