Airtac B06-MIC Battery Dedicated Cylinder B06-MIC32X175U
The AirTAC Airtac B06-MIC Battery Dedicated Cylinder B06-MIC32X175U is a genuine double acting + cushion round-body mini air cylinder with a Ø32mm bore and 175mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke175 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-MIC Battery Dedicated Cylinder B06-MIC32X175U
The B06-MIC32X175U is AirTAC's battery-manufacturing dedicated variant of the MIC32X175U round-body mini cylinder - mechanically identical to the base model, with the B06- prefix marking it for cell and module assembly lines. It delivers a 402.2 N push force at 0.5 MPa from its 32 mm bore, with a stainless-steel barrel and rod that shrug off mild corrosion and washdown residue common in electrode coating areas.
Its defining feature is the variable air cushion at both ends - a needle-valve adjustment that bleeds off kinetic energy before the piston slams the end cap, protecting delicate battery tabs and reducing noise at cycle rates up to 800 mm/s. With a 1/8 inch port and M10x1.25 male rod thread, it fits standard battery-line tooling. Safe working load is about 241 N at 60% of the 0.5 MPa push figure, so it comfortably handles stacking and tabbing fixtures within that envelope.
Airtac B06-MIC Battery Dedicated Cylinder B06-MIC32X175U Technical Specifications
| Model | Airtac B06-MIC Battery Dedicated Cylinder B06-MIC32X175U |
|---|---|
| Series | MIC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 175 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-MIC Battery Dedicated Cylinder B06-MIC32X175U
| MIC | round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac B06-MIC Battery Dedicated Cylinder B06-MIC32X175U Is Used
Cell Stacking Fixture
Pushes 402.2 N at 0.5 MPa to align and stack pouch cells in a fixture. The adjustable cushion prevents the stack from shifting on impact, keeping edge alignment within tolerance.
Tab Folding Press
Applies controlled 345.6 N pull force at 0.5 MPa to fold and crease battery tabs. The needle-set cushion at the return end stops the rod gently, avoiding crease marks on soft foil.
Module Transfer Stop
Acts as a stop gate on a battery module conveyor, extending to block a pallet. The 563 N push at 0.7 MPa holds the line, while the cushion absorbs the pallet's kinetic energy on contact.
Is the Airtac B06-MIC Battery Dedicated Cylinder B06-MIC32X175U the Right Cylinder?
For a 32 mm bore application, compare against the MIC25X100 (245.3 N push at 0.5 MPa) if your load is lighter and you want to save space, or step up to the MIC40X175 (628.3 N push at 0.5 MPa) if you need nearly 60% more force for heavier module handling. The adjustable cushion matters most when you're running high-speed cycles with a rigid load - without it, the piston's end-of-stroke impact transfers shock through the fixture. Remember this cylinder does not hold position on air loss; the cushion only decelerates near stroke end. For a held load, add an external rod lock or pilot check valve. This SKU has no -S magnet, so it cannot accept CMSG, DMSG, or EMSG switches - order the -S version if you need position sensing. The U back cover gives 90-degree port orientation for tight battery-line layouts.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-MIC Battery Dedicated Cylinder B06-MIC32X175U FAQ
At 0.5 MPa, push is 402.2 N and pull is 345.6 N. At 0.7 MPa, push rises to 563 N and pull to 483.8 N. Theoretical maximum force is 82 kgf at 1.0 MPa. The 32 mm bore uses a 1/8 inch air port and M10x1.25 male rod thread.
B06- is AirTAC's designation for battery-manufacturing dedicated cylinders - it marks this as the MIC32X175U configured for cell and module assembly lines, but it is mechanically identical to the standard model. This SKU has no -S magnet, so it cannot use CMSG, DMSG, or EMSG switches. Order the -S variant if you need position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-MIC Battery Dedicated Cylinder B06-MIC32X175U
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.