Airtac MIC Cushioned Mini Cylinder MIC16X10U
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC16X10U is a genuine double acting + cushion round-body mini air cylinder with a Ø16mm bore and 10mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ16 mm
- Stroke10 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC16X10U
High-speed actuation demands precise end-of-stroke control, which the AirTAC MIC16X10U delivers through its adjustable air cushion at both ends. This 16 mm bore, 10 mm stroke double-acting cylinder uses a needle valve to tune deceleration, absorbing shock that a fixed bumper cannot. The stainless-steel round barrel and rod resist mild corrosion, making it suitable for washdown environments. It conforms to the ISO 6432 mounting interface for straightforward bracket integration.
Operating at 0.5 MPa, it provides 100.5 N of push force and 86.4 N of pull force, peaking at a theoretical 20.5 kgf. This translates to a safe working load of about 60 N, capable of lifting roughly 5.1 kg vertically with a 2:1 safety margin. The 1/8" port and M6x1.0 male rod thread ensure secure fittings. Note this specific SKU lacks a magnet, so it cannot support CMSG, DMSG, or EMSG sensors without upgrading to the -S variant.
Airtac MIC Cushioned Mini Cylinder MIC16X10U Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC16X10U |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 10 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC16X10U
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC16X10U Is Used
Small Part Ejection
Rapidly pushes light components out of a machining area, relying on the tuned air cushion to stop the 10 mm stroke gently without slamming.
Flap Deflection
Handles light cardboard routing in packaging lines where the 100.5 N push force easily moves materials without tearing them.
Lab Sample Sorting
Pivots small sample trays with precise 10 mm movements; the stainless build tolerates wipe-downs between test cycles.
Is the Airtac MIC Cushioned Mini Cylinder MIC16X10U the Right Cylinder?
For lighter duty, the MI series offers a bumper-only alternative, whereas stepping up to the MIC20 bore increases the 0.5 MPa push force to 157 N for heavier loads. Choose the MIC16X10U when you need rapid, short-stroke cycling where the adjustable cushion is critical to prevent impact damage. The U-style 90-degree rear cover offers flexible port and mounting orientation alongside standard LB, FA, SDB, and TC options.
Remember that the air cushion only decelerates the piston near the stroke end; it does not function as a brake. If your application must hold a load vertically during air loss, install an external rod lock or pilot-operated check valve. Because this base SKU has no magnet, position sensing is unavailable unless you specify the -S version.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC16X10U FAQ
This 16 mm bore cylinder features a 1/8" port and an M6x1.0 male rod thread. At 0.5 MPa it generates 100.5 N of push force and 86.4 N of pull force. At 0.7 MPa the push increases to 140.7 N and pull to 120.9 N. The theoretical maximum force is 20.5 kgf at 1.0 MPa.
No, this specific SKU does not include a piston magnet, so it cannot accept CMSG, DMSG, or EMSG switches. You would need to select the -S variant of this cylinder to enable magnetic sensing. The adjustable air cushion at both ends functions independently of the magnet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC16X10U
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.