Airtac MIC Cushioned Mini Cylinder MIC16X110SCA
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC16X110SCA is a genuine double acting + cushion round-body mini air cylinder with a Ø16mm bore and 110mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ16 mm
- Stroke110 mm
- Port sizeM5×0.8
- Acting typeDouble acting + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC16X110SCA
Generating 100.5 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder is built for rapid actuation. The 16 mm bore features an M5×0.8 port and a 110 mm stroke. A variable air cushion at both ends lets you dial in the deceleration to eliminate end-of-stroke banging, protecting your payload at high cycle rates.
The stainless barrel and piston rod resist mild corrosion and washdown environments. It conforms to the ISO 6432 mounting interface for easy bracket interchange, and the -S suffix means a built-in magnet is present for CMSG, DMSG, or EMSG position sensing. For vertical moves, expect a safe working load of about 60 N, lifting roughly 5.1 kg with a 2:1 safety margin.
Airtac MIC Cushioned Mini Cylinder MIC16X110SCA Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC16X110SCA |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 110 mm |
| Acting type | Double acting + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC16X110SCA
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC16X110SCA Is Used
Light-Part Ejection
Throws small plastic or stamped parts out of a press at high speed, using the adjustable cushion to stop the 110 mm stroke smoothly without slamming.
Package Deflection
Pushes light cartons on a sorting line where the 60 N safe working load easily handles the mass and the cushioning prevents belt damage.
Lab Sample Routing
Actuates a diverter gate for test tubes or vials in a washdown-resistant stainless build, benefiting from the ISO 6432 dimensions for tight frames.
Is the Airtac MIC Cushioned Mini Cylinder MIC16X110SCA the Right Cylinder?
If you need less force, the smaller MI bumper mini cylinder lacks the adjustable cushion and drops to lower thrust. Stepping up to the MIC20X50 yields 157.0 N push at 0.5 MPa. Choose this 16 mm bore when moving light loads at high speeds where the needle-set cushion is essential to reduce shock and noise.
The CA rear pivot cover suits clevis mounting. Remember that the air cushion only decelerates the piston near stroke end; it does not lock or hold the load. If air pressure drops, the rod will drift, so fit an external rod lock or pilot check valve for suspension. The -S magnet enables sensors, whereas a plain SKU cannot take a switch.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC16X110SCA FAQ
This 16 mm bore cylinder has an M5×0.8 port and a 6 mm rod. It generates 100.5 N push and 86.4 N pull at 0.5 MPa, or 140.7 N push and 120.9 N pull at 0.7 MPa. The theoretical maximum force is 20.5 kgf at 1.0 MPa.
Yes, the -S suffix provides a piston magnet for CMSG, DMSG, or EMSG switches. The needle-set air cushion at both ends only decelerates the piston near the stroke end to reduce shock; it is not a brake. The cylinder will drift on air loss, so use a pilot check valve for holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC16X110SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.