Airtac MIC Cushioned Mini Cylinder MIC16X15SCA
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC16X15SCA is a genuine double acting + cushion round-body mini air cylinder with a Ø16mm bore and 15mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ16 mm
- Stroke15 mm
- Port sizeM5×0.8
- Acting typeDouble acting + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC16X15SCA
Designed for high-speed actuation in tight spaces, the AirTAC MIC16X15SCA is a double-acting, round-body stainless-steel mini cylinder with a 16 mm bore and 15 mm stroke. Unlike standard bumper units, it features an adjustable air cushion at both ends, letting you dial in the needle valve to absorb end-of-stroke shock, protect the payload, and reduce noise. The stainless barrel and rod resist mild corrosion and washdown environments, while the CA rear pivot cover provides flexible clevis mounting. It conforms to the ISO 6432 mounting interface for straightforward bracket interchangeability.
At 0.5 MPa, this bore generates 100.5 N of push force and 86.4 N of pull force, climbing to 140.7 N push at 0.7 MPa. For practical sizing, a safe working load is roughly 60 N, and it can lift about 5.1 kg vertically with a 2:1 safety margin. The M5×0.8 port and M6x1.0 male rod thread keep the pneumatic footprint compact. Because this SKU includes the -S magnet, it is fully ready for CMSG, DMSG, or EMSG position sensing.
Airtac MIC Cushioned Mini Cylinder MIC16X15SCA Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC16X15SCA |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 15 mm |
| Acting type | Double acting + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC16X15SCA
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC16X15SCA Is Used
Small Parts Ejection
Rapidly pushes lightweight plastic or metal parts out of a machining zone, using the adjustable cushion to prevent the 15 mm stroke from slamming and marking the components.
Lab Sample Diverting
Handles the routing of small vials or test tubes on a conveyor, where the stainless build resists cleaning chemicals and the 60 N safe working load easily moves the trays.
PCB Handling Stops
Acts as a high-speed stop for delicate electronics assembly lines, decelerating smoothly at the end of travel to avoid shock damage to fragile circuit boards.
Is the Airtac MIC Cushioned Mini Cylinder MIC16X15SCA the Right Cylinder?
When sizing this 16 mm bore, stepping down is not an option within the MIC cushioned range, as smaller diameters rely on fixed bumpers rather than adjustable air cushions. If you need more force, the next size up is the MIC20, which jumps to 157.0 N push at 0.5 MPa. The adjustable cushion is essential when cycling at high speeds up to 800 mm/s or moving sensitive loads that cannot tolerate a hard impact. Remember that the cushion only decelerates the piston near the stroke end; it does not act as a brake. If your application must hold a vertical load during air loss, add an external rod lock or pilot check valve. Along with the CA clevis cover, you can use LB foot, FA flange, SDB pivot, or TC trunnion mounts.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC16X15SCA FAQ
This double-acting cylinder has a 16 mm bore and 15 mm stroke. It generates 100.5 N push and 86.4 N pull at 0.5 MPa, and 140.7 N push and 120.9 N pull at 0.7 MPa. The theoretical maximum force is 20.5 kgf at 1.0 MPa. It uses an M5×0.8 port and an M6x1.0 male rod thread.
Yes, this model includes the -S piston magnet, allowing you to mount CMSG, DMSG, or EMSG switches for detection. The adjustable air cushion only decelerates the piston near the stroke end to reduce shock; it does not lock or hold the load. For position holding on air loss, you need an external rod lock or pilot check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC16X15SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.