Airtac MIC Cushioned Mini Cylinder MIC16X15SCM
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC16X15SCM is a genuine double acting + cushion round-body mini air cylinder with a Ø16mm bore and 15mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ16 mm
- Stroke15 mm
- Port sizeM5×0.8
- Acting typeDouble acting + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC16X15SCM
Tame high-speed end-of-stroke shock in tight spaces with the AirTAC MIC16X15SCM. This double-acting, round-body stainless steel mini cylinder features an adjustable air cushion at both ends, letting you dial in the needle valve to smoothly decelerate loads instead of relying on a fixed bumper. The Ø16 mm bore conforms to the ISO 6432 mounting interface, dropping directly into standard mini brackets and clevises. With a 15 mm stroke and a CM round rear cover, it fits neatly into compact assemblies while resisting mild corrosion and washdown environments.
At 0.5 MPa, it generates 100.5 N of push force and 86.4 N of pull force, making it ideal for light part handling. A practical computed insight: this translates to a safe working load of about 60 N, or roughly 5.1 kg of vertical lift with a 2:1 safety margin. The M5×0.8 port and M6x1.0 male rod thread keep fittings standard. Because the -S suffix denotes a built-in piston magnet, you can easily mount CMSG, DMSG, or EMSG switches for position sensing.
Airtac MIC Cushioned Mini Cylinder MIC16X15SCM Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC16X15SCM |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 15 mm |
| Acting type | Double acting + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC16X15SCM
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC16X15SCM Is Used
Light Part Ejection
Safely eject small plastic or stamped parts at high speed. The adjustable air cushion silently stops the 15 mm stroke, preventing the 100.5 N push force from slamming into the end cap.
Compact Diverting
Use the 5.1 kg vertical lift capacity to push lightweight cartons on a conveyor. The stainless build handles humid packing environments without corroding.
Small Gripper Actuation
Drive a small parallel gripper in ISO 6432 standard clevis mounts. The built-in -S magnet allows CMSG sensors to confirm grip positions instantly.
Is the Airtac MIC Cushioned Mini Cylinder MIC16X15SCM the Right Cylinder?
When sizing this 15 mm stroke actuator, consider stepping down to an MI-series bumper cylinder if your cycle speeds are low and shock is negligible, as the MIC's adjustable cushioning is unnecessary for slow moves. Conversely, if the 100.5 N push force at 0.5 MPa is insufficient for your payload, moving up to the Ø20 MIC bore provides 157.0 N of push force. The adjustable air cushion truly proves its worth at high speeds or when moving heavier masses, protecting your mechanics from destructive impact noise.
Remember that the cushion needle only decelerates the piston near the stroke end; it does not function as a brake or lock. If the air supply drops, the piston will drift, so install an external rod lock or pilot-operated check valve for suspended loads. For mounting flexibility, pair the CM rear cover with LB foot, FA flange, SDB pivot, or TC trunnion brackets, and utilize the -S magnet with CMSG, DMSG, or EMSG sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC16X15SCM FAQ
This double-acting cylinder delivers 100.5 N push and 86.4 N pull at 0.5 MPa, and 140.7 N push and 120.9 N pull at 0.7 MPa. Its theoretical maximum force is 20.5 kgf at 1.0 MPa. The air port size is M5×0.8.
It features a variable air cushion at both ends that uses a needle valve to decelerate the piston near stroke end, reducing shock. It is not a locking brake. The -S suffix means it has a built-in magnet for CMSG, DMSG, or EMSG position sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC16X15SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.