Airtac MIC Cushioned Mini Cylinder MIC16X160U
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC16X160U is a genuine double acting + cushion round-body mini air cylinder with a Ø16mm bore and 160mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ16 mm
- Stroke160 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC16X160U
Built for compact automation, this double-acting stainless steel round-body mini cylinder uses an adjustable air cushion at both ends to decelerate loads smoothly. The needle-set cushion soaks up high-speed end-of-stroke shock, cutting noise and protecting the workpiece far better than a fixed bumper. Its stainless barrel and Ø6 mm piston rod resist mild corrosion and washdown environments, and it conforms to the ISO 6432 mounting interface for standard mini-cylinder brackets.
Delivering 100.5 N of push force at 0.5 MPa, this Ø16 bore unit provides a safe working load of about 60 N. It lifts approximately 5.1 kg vertically with a 2:1 safety margin. The 160 mm stroke operates at 30-800 mm/s via a 1/8" port. This specific SKU lacks the -S magnet, meaning it cannot accept CMSG, DMSG, or EMSG sensors. It features a U back cover for 90-degree mounting orientation.
Airtac MIC Cushioned Mini Cylinder MIC16X160U Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC16X160U |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 160 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC16X160U
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC16X160U Is Used
Light Parts Ejection
Ejects small plastic or metal parts at high speed. The adjustable air cushion prevents the rod from slamming the end cap, protecting delicate components during ejection.
Package Diverting
Pushes lightweight cartons on a conveyor line. The 100.5 N push force at 0.5 MPa easily handles small boxes, while the U cover allows straightforward 90-degree mounting.
Lab Sample Handling
Moves sample trays in testing equipment. The stainless construction resists mild cleaning chemicals, and the smooth cushioning stops liquid samples from splashing at stroke end.
Is the Airtac MIC Cushioned Mini Cylinder MIC16X160U the Right Cylinder?
When sizing this 16 mm bore unit, step up to the MIC20X50 if you need more push force (157 N at 0.5 MPa), or drop down to the 8 mm MI bumper cylinder for lighter duties since the cushion-equipped MIC line starts at Ø16. The adjustable air cushion is essential here if you run the 160 mm stroke near the 800 mm/s maximum, as it prevents harsh impacts at both ends. Note that the air cushion only decelerates the load near the stroke end; it is not a brake. If your application must hold position on air loss, install an external rod lock or pilot check valve, because the piston will drift. Mount this cylinder using standard ISO 6432 brackets, and remember this non-magnet version cannot support position sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC16X160U FAQ
This double-acting cylinder uses a 1/8" port and generates 100.5 N push / 86.4 N pull at 0.5 MPa, and 140.7 N push / 120.9 N pull at 0.7 MPa. The theoretical maximum force is 20.5 kgf at 1.0 MPa.
No, this specific SKU does not include the -S magnet, so it cannot accept CMSG, DMSG, or EMSG switches. You would need the -S variant for sensing. The adjustable air cushion at both ends only decelerates the load near stroke end and does not lock or hold the position.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC16X160U
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.