Airtac MIC Cushioned Mini Cylinder MIC16X20CA
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC16X20CA is a genuine double acting + cushion round-body mini air cylinder with a Ø16mm bore and 20mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ16 mm
- Stroke20 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC16X20CA
Dial in end-of-stroke deceleration with the AirTAC MIC16X20CA, a double-acting round-body mini cylinder built with a stainless-steel barrel and rod for mild washdown resistance. It conforms to the ISO 6432 mounting interface, dropping directly into standard mini-cylinder brackets. A needle-set adjustable air cushion at both ends absorbs high-speed shock, protecting your load far better than a fixed bumper.
At 16 mm bore and 20 mm stroke, this unit pushes 100.5 N and pulls 86.4 N at 0.5 MPa, yielding a safe working load of about 60 N or a 5.1 kg vertical lift with a 2:1 margin. The 1/8" port and M6x1.0 male rod thread keep the footprint compact. Note this SKU lacks a magnet, so it cannot take CMSG, DMSG or EMSG sensors; specify the -S variant if you need position detection.
Airtac MIC Cushioned Mini Cylinder MIC16X20CA Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC16X20CA |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 20 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC16X20CA
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC16X20CA Is Used
Light Part Ejection
Cushioned end-of-stroke deceleration safely ejects delicate plastic components off a conveyor at high speed without cracking them.
Small Flap Folding
Provides the 100.5 N push force needed to fold light cardboard flaps on a packaging line while the needle cushion prevents slamming.
Lab Sample Routing
The stainless build resists mild cleaning chemicals in lab automation, while the CA pivot bracket allows angled sample gate actuation.
Is the Airtac MIC Cushioned Mini Cylinder MIC16X20CA the Right Cylinder?
For lighter duty, the smaller MI bumper mini cylinder lacks the adjustable cushion entirely. If you need more force, stepping up to the MIC20X50 raises 0.5 MPa push thrust to 157 N. Choose this cushioned model when operating at high speeds where impact shock would damage a standard bumper cylinder.
The CA rear pivot cover suits clevis mounting, complementing available LB foot, FA flange, SDB pivot and TC trunnion options. Remember the air cushion only decelerates the piston near stroke end; it is not a brake. If you must prevent drift on air loss, add an external rod lock or pilot check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC16X20CA FAQ
This 16 mm bore cylinder pushes 100.5 N and pulls 86.4 N at 0.5 MPa. At 0.7 MPa it pushes 140.7 N and pulls 120.9 N, with a theoretical max of 20.5 kgf at 1.0 MPa. It uses a 1/8" port and an M6x1.0 male rod thread.
No, this specific SKU does not include a magnet, so CMSG, DMSG and EMSG switches will not function. You must order the -S variant to enable magnetic sensing. The adjustable air cushion at both ends only decelerates the load; it does not lock or hold position on air loss.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC16X20CA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.