Airtac MIC Cushioned Mini Cylinder MIC16X20SCM
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC16X20SCM is a genuine double acting + cushion round-body mini air cylinder with a Ø16mm bore and 20mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ16 mm
- Stroke20 mm
- Port sizeM5×0.8
- Acting typeDouble acting + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC16X20SCM
High-speed actuation in tight spaces is where the AirTAC MIC16X20SCM excels. This 16mm bore, 20mm stroke actuator uses a needle-set variable air cushion at both ends to decelerate the load smoothly, eliminating the harsh impact typical of bumper-style mini cylinders. The stainless-steel round barrel and Ø6mm rod provide mild washdown resistance, and the CM round rear cover keeps the M5×0.8 port orientation clean for compact manifolding.
Dropping into standard ISO 6432 mini-cylinder brackets and clevises, this double-acting unit generates 100.5N of push force at 0.5MPa. That translates to a safe working load of about 60N, or roughly 5.1kg of vertical lift with a 2:1 safety margin. The built-in piston magnet (-S) supports CMSG, DMSG, and EMSG position switches for precise end-of-stroke detection.
Airtac MIC Cushioned Mini Cylinder MIC16X20SCM Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC16X20SCM |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 20 mm |
| Acting type | Double acting + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC16X20SCM
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC16X20SCM Is Used
Small Component Ejection
Shoots tiny molded parts out of a press at high speed, using the adjustable cushion to prevent the 60N load from slamming into the endcap.
Package Diverting
Pushes light cartons on a conveyor line where the 5.1kg vertical lift capacity and smooth cushioned stroke protect fragile packaging edges.
Lab Sample Routing
Indexes test tubes between analysis stations, relying on the stainless build for mild corrosion resistance and the -S magnet for position feedback.
Is the Airtac MIC Cushioned Mini Cylinder MIC16X20SCM the Right Cylinder?
For lighter duty, the MI16 bumper cylinder offers similar dimensions but lacks the adjustable end-cushioning required for high-speed cycling. If your payload exceeds the 100.5N @0.5MPa rating, stepping up to the MIC20X50 provides 157.0N of push force. Choose this cushioned model when cycle speeds push past 400mm/s and a fixed bumper would transmit excessive shock to your frame.
Remember that the air cushion only decelerates the piston near the stroke end; it does not function as a brake or lock. If the air supply drops, the piston will drift, so fit an external rod lock or pilot-operated check valve for suspended loads. Mounting options include LB foot, FA flange, SDB pivot, and TC trunnion brackets, and the -S magnet enables solid-state or reed sensor tracking.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC16X20SCM FAQ
This 16mm bore cylinder has an M5×0.8 air port and an M6x1.0 male rod thread. It generates 100.5N push and 86.4N pull at 0.5MPa, 140.7N push and 120.9N pull at 0.7MPa, with a theoretical maximum force of 20.5kgf at 1.0MPa.
No. The adjustable air cushion only decelerates the piston near the end of the stroke to reduce shock; it is not a brake or lock. If air pressure drops, the piston will drift. You must use an external rod lock or pilot check valve to hold a suspended load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC16X20SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.